Manualshelf

Installation Instructions

ManualsBrandsPelco ManualsNetwork20 Megapixel GFC Professional Multi Directional Environmental Dome Camera, 3.7-7.7 mm Lens
12345678910
9
9. Remove part of the outer CAT5E or better Ethernet cable jacket and be careful not to damage the internal UTP wires.
Separate out the four pairs of wire and terminate these wires, following the standard TIA/EIA T568B. Make sure the
wires are pushed into the RJ45 plug so that they are fully inserted. Firmly crimp the RJ-45 plug so that the individual
wires and the outer sheath are all fully trapped inside the plug.
Note: Carefully route the ethernet cable under the lens plate (camera base) to avoid any damages to the microphone
pins and/or other exposed components. The picture on step 14 shows the wire routing.
10. Tighten and install the components of the waterproof connector.