Spec Sheet

TECHNICAL SPECIFICATIONS
COMPONENT FEATURES
CAMERA
Imaging Device 1/2.8-inch
Imager Type CMOS
Imager Readout Progressive scan
Highest Resolution
3 MP 2048 x 1536
2 MP 1920 x 1080
Signal-to-Noise Ratio >60 dB
Electronic Shutter Range
1/10000 sec (or faster) to 1sec
Wide Dynamic Range Up to 130 dB
White Balance Range: 2,500° to 10,000°K; Selectable Auto/
Manual
Day/Night Capabilities Mechanical IR cut filter (ON/OFF/AUTO), with
different set points on lux
Adaptive IR Illumination 850nm wavelength, maximum distance of
40 meters (131 feet)
3D Noise Reduction Yes (ON / OFF selectable)
VALUES IN PARENTHESES ARE INCHES; ALL OTHERS ARE CENTIMETERS.
Indoor/Vandal-Resistant, Surface Mount
• Attaches to Electrical Box Adapter
• Meets IP54
• Meets IK10+ (50J)
• Aluminum Construction with Polycarbonate
Bubble
• RAL 9003
• Built-in Microphone
• IEEE802.3af PoE Class 3, 24 VAC or 12 VDC
Environmental/Vandal-Resistant, Surface
Mount
• Attaches to Electrical Box with Adapter
• Meets IP66, IP67, IP68, IP69K
• Meets Type 4X
• Meets IK10+ (50J)
• Aluminum Construction with Polycarbonate
Bubble
• RAL 9003
•Heater
• IEEE802.3at PoE+ Class 4, 24 VAC or 12 VDC
• NEMA TS2 (Temp.) para 2.2.7.3 - 2.2.7.7
Minimum Illumination
Resolution Lens Sensitivity
Color Mono
Mono (IR on)
33 ms 500 ms 33 ms 500 ms
2 MP 2.8-8 mm f/1.3 0.0125 lux 0.0012 lux 0.0025 lux 0.0003 lux 0.0 lux
3 MP
2.8-8 mm f/1.3 0.05 lux 0.005 lux 0.010 lux 0.001 lux 0.0 lux
8-20 mm f/1.5 0.080 lux 0.008 lux 0.015 lux 0.0018 lux 0.0 lux