Installation Manual
Table Of Contents
- Sarix Enhanced III Dome Cameras
- Important Notices
- Description
- Dome Camera Models
- Product Overview
- Conduit Plug Options
- Installation
- Installing the Camera
- Preparing the camera For Installation
- In-Ceiling Installation: with IME3ICM-E (not supplied)
- Pendant Installation with IME3PM-E (Not supplied) and WMVE-SW (not supplied)
- Surface Mount: Installation to a wall/ceiling
- Surface Mount Installation to an Outlet Box with IME3EBAP-E (Not Supplied)
- Connecting the Cables
- Alarm/Relay/Audio Port
- Completing the Camera Installation
- Accessing the Camera
C6644M (2/20) 10
Dome Camera Models
SUPPLIED PARTS LIST
USER-SUPPLIED PARTS LIST
In addition to the standard tools and cables required for a video security installation, you will need to provide the following items:
PRODUCT LABEL
The product label lists the model number, serial number, and Media Access Control (MAC) address. This information might be required for setup. A product
label is located on the bottom of the camera and on the side of the product box.
Qty Description
1 Camera
1 Surface mounting template
1 Installation manual
1 China RoHS document
1 Power terminal block
2 Plastic expansion anchors
2 M4 x 35 mm self-tapping Phillips screws
1 Torx T20 security L-key
1 Grommet
1 Important Safety Instructions document
Qty Description
1 Conduit (if applicable)
1 Conduit adapters (if applicable)
1 RJ-45 connector to terminate cables
1 Cat5e (or higher) cable
1 #2 Phillips screwdrivers
1 Tool for drilling
1 24-28 AWG 4, 8 or 10 multi conductor cable for alarms and/or audio (optional) and/or power
1 16-20 AWG 2 conductor cable for power (optional)
1 Up to a 256 GB Micro SDHC or SDXC card capable of a minimum write speed of 10 MB/sec is recommended for recording HD video
(optional)