Installation Manual
Table Of Contents
- Sarix Enhanced III Dome Cameras
- Important Notices
- Description
- Dome Camera Models
- Product Overview
- Conduit Plug Options
- Installation
- Installing the Camera
- Preparing the camera For Installation
- In-Ceiling Installation: with IME3ICM-E (not supplied)
- Pendant Installation with IME3PM-E (Not supplied) and WMVE-SW (not supplied)
- Surface Mount: Installation to a wall/ceiling
- Surface Mount Installation to an Outlet Box with IME3EBAP-E (Not Supplied)
- Connecting the Cables
- Alarm/Relay/Audio Port
- Completing the Camera Installation
- Accessing the Camera
18 C6644M (2/20)
SURFACE MOUNT INSTALLATION TO AN OUTLET BOX WITH IME3EBAP-E (NOT
SUPPLIED)
INSTALLATION GUIDE
PARTS LIST SUPPLIED WITH THE MOUNT
1. Attach the Electrical Adapter Plate to:
a. Single Gang Electrical Box using two 6-32x1in screws (supplied).
b. Double Gang Electrical Box using four 6-32x1in screws (supplied).
c. 4” Square Outlet Box using two 8-32x1in screws (supplied).
Figure 9. Adapter Plate
2. Feed the cables through the hole in the plate.
3. Attach the backbox to the plate with the two M4x16mm screws (supplied with the camera).
4. Refer to Connecting the Cables, Positioning the Camera, and Completing the Camera Installation sections before proceeding.
Qty Description
1 Electrical Adapter Plate
2 M4x16mm Phillips screws
2 8-32x1in Phillips screws
4 6-32x1in Phillips screws