Installation Manual
Table Of Contents
- Sarix Enhanced III Dome Cameras
- Important Notices
- Description
- Dome Camera Models
- Product Overview
- Conduit Plug Options
- Installation
- Installing the Camera
- Preparing the camera For Installation
- In-Ceiling Installation: with IME3ICM-E (not supplied)
- Pendant Installation with IME3PM-E (Not supplied) and WMVE-SW (not supplied)
- Surface Mount: Installation to a wall/ceiling
- Surface Mount Installation to an Outlet Box with IME3EBAP-E (Not Supplied)
- Connecting the Cables
- Alarm/Relay/Audio Port
- Completing the Camera Installation
- Accessing the Camera
20 C6644M (2/20)
Alarm/Relay/Audio Port
Figure 12. Relay and Alarm Connections
POSITIONING THE CAMERA
• Pan Adjustment: Rotate the lens base until you are satisfied with the field of view.
• Horizontal Rotation: Rotate 3D assembly in the lens base.
• Tilt Adjustment: Lift to open the inner liner, and tilt the camera lens to your designed angle. Restore the inner liner back to its default
position after adjustment.
• NOTE: Limitation for three axes position:
• Pan range: 370°
• Rotate range:
±100°
• Tilt range: -10° to -90°
• The camera field of view is set by making adjustments to zoom and focus via the Web UI. Refer to the operations manual.
Designation Function
Alarm Input
AI Alarm In +
GND Ground
Alarm Output
GND Ground
AO Alarm Out +
COM Common
Audio In
Audio In +
Audio In -
Audio Out
Audio Out +
Audio Out -