Installation Manual
Table Of Contents
- Sarix Enhanced III Dome Cameras
- Important Notices
- Description
- Dome Camera Models
- Product Overview
- Conduit Plug Options
- Installation
- Installing the Camera
- Preparing the camera For Installation
- In-Ceiling Installation: with IME3ICM-E (not supplied)
- Pendant Installation with IME3PM-E (Not supplied) and WMVE-SW (not supplied)
- Surface Mount: Installation to a wall/ceiling
- Surface Mount Installation to an Outlet Box with IME3EBAP-E (Not Supplied)
- Connecting the Cables
- Alarm/Relay/Audio Port
- Completing the Camera Installation
- Accessing the Camera
C6644M (2/20) 21
Completing the Camera Installation
1. If previously removed, reattach the safety lanyard to the backbox.
2. Reattach the lower dome to the backbox by fastening the three screws. Refer to the following figures for the appropriate method to
reattach the lower dome.
Figure 13. Incorrect Dome Cover Attachment Method
Figure 14. Correct Dome Cover Attachment Method
Figure 15. Align Small Hole for Microphone
3. Put on the trim ring and rotate it clockwise to secure the trim ring on the bracket.