Installation Manual
Table Of Contents
- Sarix Enhanced III Dome Cameras
- Important Notices
- Description
- Dome Camera Models
- Product Overview
- Conduit Plug Options
- Installation
- Installing the Camera
- Preparing the camera For Installation
- In-Ceiling Installation: with IME3ICM-E (not supplied)
- Pendant Installation with IME3PM-E (Not supplied) and WMVE-SW (not supplied)
- Surface Mount: Installation to a wall/ceiling
- Surface Mount Installation to an Outlet Box with IME3EBAP-E (Not Supplied)
- Connecting the Cables
- Alarm/Relay/Audio Port
- Completing the Camera Installation
- Accessing the Camera
6 C6644M (2/20)
POWER SOURCE
This product is intended to be supplied by a Listed Power Adapter or DC power source marked “L.P.S.” (or “Limited Power Source”), rated 12Vdc,
2A, 24Vac (50/60 Hz), 1.5A or POE 56Vdc, 0.6A, Tma = 60 degree C, and the altitude of operation = 2000m. If you need further assistance with
purchasing the power source, please contact to PELCO, INC for further information.
KOREAN CLASS A EMC
ESD WARNING
WARRANTY STATEMENT
For information about Pelco’s product warranty and thereto related information, refer to www.pelco.com/warranty.
SUPPLEMENTAL RESOURCES
All resources are available in one location: https://www.pelco.com/fixed-ip-sarix-enhanced-series
From this location, select the asset(s) you want to download.
FIRMWARE VERSION
Before installing the camera, visit the online Pelco supplemental resources to check for firmware updates.
Name Description
Sarix Enhanced Series Firmware Download the latest firmware for your Sarix Enhanced Series camera system.
Sarix Enhanced Series Documentation Download the latest specification sheets as well as installation and operations
manuals for the Sarix Enhanced Series.
VxToolbox Download the latest firmware for camera management utility. This software
helps you discover the camera and update firmware.
WARNING: This product is sensitive to Electrostatic Discharge (ESD). To avoid ESD damage to this product, use ESD safe
practices during installation. Before touching, adjusting or handling this product, correctly attach an ESD wrist strap to your wrist
and appropriately discharge your body and tools. For more information about ESD control and safe handling practices of
electronics, please refer to ANSI/ESD S20.20-1999 or contact the Electrostatic Discharge. Association (www.esda.org).