Installation Manual

ManualsBrandsPelco ManualsNetwork12 Megapixel 270° Panoramic In-ceiling, Environmental Vandal Network Camera, Gray

1

2

3

4

5

6

7

8

9

Table Of Contents

5

Installing the Pendant Mount

The pendant mount attaches to 1-1/2 in. NPT pipe/conduit or wall mount with 1-1/2 in. NPT thread (not supplied).

1. Apply anti-seize lubricant to the NPT pipe/conduit, and install the pendant mount to the conduit.

2. Pull the wiring through the opening.

Installing the Surface Mount

1. Reference the Surface Mount template and Install the mounting plate to the mounting substrate to one of the following:

• Standard 4 in. square electrical box (not supplied).

• Standard 2-gang electrical box (not supplied).

• Any substrate using standard screw size M6 or 1/4 in. hardware (not supplied)

NOTE: Head height and diameter of fasteners are not to exceed 5/16 in. and 3/4 in., respectively.