Quick Start Guide

6
IN-CEILING FLUSH MOUNT WITH IMPICM-1ER
Install the environmental vandal dome camera to an in-ceiling area as shown in the following procedure.
1. Utilize torx wrench to loosen the screws on lens base and top cover in order to disassemble the 3 parts of camera individually.
2. Connect the required cables (Ethernet and Alarm/Audio Input/Output threads) with the corresponding ports on rear side.
3. Attach the mounting template onto an in-ceiling surface followed by drilling a hole based on the template indication.
4. Embed the in-ceiling mount bracket into the hole that was drilled based on the mounting template.
1
2
3
4