Quick Start Guide

7
5. Use a cross screw driver to turn the 2 bracket screws clockwise to extend the locking arms and tighten them securely to
compress the locking arms so that the bracket can be fixed within the in-ceiling area firmly.
6. Based on your needs, use the bottom conduit hole or side conduit hole on lower case for cable entry and connect the cables.
NOTE: Please properly lock the conduit hole plug on the unused hole. For example, lock the side conduit hole with the
plug while using the bottom conduit hole for cable entry and vice versa.
7. Fix the lower case onto the in-ceiling bracket by fastening the 4 screws followed by aligning the identifying red dots of
lower case and lens base to properly assemble them together with securing the 3 lens base screws.
8. After adjusting focus position to the satisfied field of view, mount the top cover on the lens base, both of which have a red
dot respectively also for aligning identification and tighten the 3 top cover screws firmly.
9. Attach the 2 spring hooks flanked the protective cover to the in-ceiling bracket for mounting completion.
NOTE: It is strongly recommended that you first ensure the mounting area is stable enough to withstand the in-ceiling
bracket and locking arms clamping on the ground of safety concern.
5
6
10
Protective Cover
Spring Hook * 2
Tightening torque: 8 ~ 10kg/cm
(17.64 ~ 22.05 lb/in)
Tightening torque: 8 ~ 10kg/cm
(17.64 ~ 22.05 lb/in)