Quick Start Guide

PENDANT MOUNT WITH IMPPM-1ER

The Pendant Installation involves mounting IMPPM-1ER Sarix Environmental Pendant Mount for Environmental Vandal

Dome camera. The camera must be first installed within the pendant mount back box with an adaptor ring before assembled

with additional pendant mount brackets. Below are the recommended brackets, which are NOT provided, for additional

pendant mount applications for your reference.

NOTE: Mounts and conduits must be sealed to prevent condensation in the camera

1. Rotate the adaptor ring, which can connect with brackets of 1 1/2”-conform screw thread, clockwise to the pendant mount back

box securely as shown below. The rubber o-ring provides seal on grooves between back box and adaptor ring. Note that it is

highly suggested to apply waterproof repellent onto the upper screw thread as shown below for complete ingress protection.

The diagram in the right side is the back box mounted with the adaptor ring.

NOTE: Anti-seize compound should be applied on environmental pendant. Not doing so might prevent the unit from

being separated in the future. Waterproof tape can also be used to help prevent water ingress damage.

Pendant Wall Mount

Pendant Pole Mount

Adaptor Ring

Rubber O-Ring

Apply Waterproof Repellent