Spec Sheet

TECHNICAL SPECIFICATIONS
ELECTRICAL
Network Port RJ-45 connector for 100Base-TX
Power Input PoE+ Class 4 or 24 VAC (Environmental),
PoE Class 3, 24 VAC nominal, 18 to 32 VAC
range, 12 VDC (Indoor)
Power Consumption
Indoor <6 W
Outdoor <16 W (with heater ring)
Local Storage Up to 64 GB on Micro SDHC or SDXC card
Alarm
Input 1
Output 1; PhotoMOS
™
relay (30 V, 1 A)
Triggers Unsupervised mode that detects switch
closures (N.O. and N.C.)
ENVIRONMENTAL
Operating Temperature
Outdoor –40° to 60°C (–40° to 140°F)*
Indoor –10° to 55°C (14° to 131°F)
74°C (165.2°F) absolute maximum ambient
temperature per NEMA TS-2 (Environmental
models only).
Storage Temperature –40° to 60°C (–40° to 140°F)
Operating Humidity 5% to 90%, RH noncondensing
*Thermostatically controlled heating provides ramped heating control
between the initial heater on at 15° C (59°F) and full heating mode at
–40°C (–40°F).
GENERAL
Construction Aluminum body and trim ring (environmental);
plastic body and trim ring (indoor);
polycarbonate bubble (indoor and
environmental)
Finish
Indoor RAL 9003
Outdoor RAL 7047
Pan/Tilt Adjustment Manual
Pan 370°
Tilt 90°
Rotate 355°
IndoorOutdoor
Unit Weight.80 kg (1.76 lb)1.40 kg (3.09 lb)
Shipping Weight 1.20 kg (2.66 lb) 1.80 kg (3.97 lb)
NETWORK
Supported Protocols TCP/IP, UDP/IP (unicast, multicast IGMP),
ICMP, IPv4, IPv6, SNMP v2c/v3, HTTP, HTTPS,
SSL, SSH, SMTP, FTP, RTSP, UPnP, DNS, NTP,
RTP, RTCP, LDAP (client), QoS, GB28181,
802.1X
Users
Unicast 1 administrator, up to 4 viewers
Multicast Unlimited users H.264
Security Access Multiple user access levels with password
protection
INTEGRATION
Video Management VideoXpert;
Endura 2.0 (or later);
Digital Sentry 7.3 (or later);
Third-party VMS through Pelco API, ONVIF
Profile S, Profile G, and Profile Q
Mobile Application Pelco Mobile
Analytics Simple motion detection and camera
sabotage detection
Local Storage Capture 1-, 5- or 10-second video clips on
camera sabotage, motion detection, or alarm
input; record video continuously in the case of
network outage with option to overwrite;
access video through FTP protocol and ONVIF
Profile G
Camera Discovery
and Firmware Discover cameras upgrade firmware upgrade
using the Pelco Device Utility 2 version 2.2 or
later; or Pelco Utilities
Web Browser Support Microsoft
®
Internet Explorer
®
9.0, Apple
®
Safari
®
7.0.6, Mozilla
®
Firefox
®
31.0,
Google
®
Chrome
™
37.0.2062.124 m and later
Multilingual User Interface English, French, German, Italian, Portuguese,
Arabic, Russian, Spanish, Turkish, Korean,
Simplified Chinese