User Manual

3. Based on your needs, use the bottom conduit hole or side conduit hole on the lower case for cable entry and

connect the required cables.

NOTE: Please properly lock the conduit hole plug on the unused hole. For example, lock the side conduit hole

with the plug while using the bottom conduit hole for cable entry and vice versa.

4. Fix the lower case onto the in-ceiling bracket by fastening the 4 screws followed by aligning the identifying red

dots of lower case and lens base to properly assemble them together with securing the 3 lens base screws.

5. After adjusting focus position to the satisfied field of view, mount the top cover on the lens base, both of which

have a red dot respectively also for aligning identification and tighten the 3 top cover screws firmly.

6. Attach the 2 spring hooks flanked the protective cover to the in-ceiling bracket for mounting completion.

FIGURE 2 - 8: SURFACE MOUNT

NOTE: It is strongly recommended that you first ensure the mounting area is stable enough to withstand the in-ceiling

bracket and locking arms clamping on the ground of safety concern.

Protective Cover

Spring Hook * 2

Fix lower case onto the in-ceiling

bracket by securing the 4 screws.

Assemble lens base with lower

case and fasten the 3 torx screws.

Further mount top cover onto lens

base and tighten the 3 torx screws.