User Manual

Method 3: Pendant Mount (requires pendant adapter mounting accessory)

NOTE: Mounts and conduits must be sealed to prevent condensation in the camera

The Pendant Installation involves mounting the camera to the wall with IMPPM-1ER Sarix Environmental

Pendant Mount for Environmental Vandal Dome. The camera must be installed in the back box with a 3/4” rain-tight

compression gland (#1) and a lock nut (#2) as shown below. The compression gland and lock nut are not provided.

①

②

FIGURE 2-10: RAIN-TIGHT& LOCK NUT

1. Rotate the adaptor ring, which can connect with 1 1/2” pole later, clockwise to the pendant mount back box securely

as shown below. The diagram in the right side is the back box mounted with the adaptor ring.

FIGURE 2 -11: PENDANT MOUNT 1/2

NOTE: Anti-seize compound should be applied on environmental pendant. Not doing so might prevent the unit

from being separated in the future. Waterproof tape can also be used to help prevent water ingress damage.

Adaptor Ring

① Rain-tight Compression

Gland

② Lock Nut