User Manual

19
Safety-cord screw
Safety-cord screw
 If you possess a safety wire (sold separately), connect the safety wire with one end to the mounting surface and the
other end to the safety-cord screw of the camera. Depending on different applications, please connect the safety wire to
the corresponding safety-cord screw as shown in the following figures.
FIGURE 2 -13: SAFETY-CORD SCREW
2.3.5 Top Cover Defog
Defog function, which heats up camera to overcome certain extreme weather conditions (e.g., snow or frost), which may harm
the operation of camera, is embedded within this vandal camera. However, in order to prevent scald incident from happening
to installers, the Defog heating function won’t be activated when the top cover is detached from the camera body as the shown
in the following figure where a button at the camera body (marked red) is not pressed by the salient point of top cover (marked
green). Instead, when the salient point presses the button of camera body, the heating function will activate automatically.
FIGURE 2 -14: TOP COVER DEFOG ACTIVATION