User Manual

2.4.2.3 Viewing Preparation

Images of the unit can be viewed through Microsoft Internet Explorer 8 or later. Before viewing, follow these steps to enable

the display.

1. Enable Cookies On the Privacy tab, move the settings slider to Low or Accept All Cookies.

2. Change Security in Internet options and click Custom Level to open the Security Settings – Internet Zone screen.

NOTE: If the camera operates inside of the intranet, click the Intranet icon. If the camera operates outside of the intranet,

click the Internet icon.

3. Scroll down to the ActiveX controls and plug-ins radio buttons and set as follows:

 【Download signed ActiveX controls】 Prompt (recommended)

 【Download unsigned ActiveX controls】 Prompt

 【Automatic prompting for ActiveX controls】 Enable

 【Run ActiveX controls and plug-ins】 Enable

 【Script ActiveX controls marked safe for scripting*】 Enable

4. Press OK to save the settings.

5. Close all Microsoft Internet Explorer Windows and restart a new window. This will allow the new settings taking effect.

6. Type your setting IP address into the browser.

7. Then you should be able to see the camera image screen.