User Manual
42
Orientation
Use this setting when installing the camera in an inverted position. If the orientation is not adjusted, the image will display
upside down and mirrored.
Select one of the following options:
1. Click the “Flip left-to-right” box to rotate the camera image 180 degrees horizontally.
2. Click the “Flip top-to-bottom” box to rotate the camera image 180 degrees vertically.
Digital processing
Digital processing settings can adjust the camera’s noise reduction, sharpness, saturation, contrast, brightness and hue.
Move the slider to the left or right to change the following settings:
3D Noise Reduction: Enable 3D Noise Reduction to improve video noise in low light scenes. Turn off 3D noise reduction
if details are blurred in moving objects.
Sharpness: Controls the clarity of detail in a scene. Move the slider to the right to increase the sharpness; move the
slider to the left to decrease the sharpness. Increasing the sharpness also increases the image noise. The range of
adjustment is –100 to 100; the default setting is 0 (zero).
Saturation: Controls how intense or vivid the colors are in a scene. Move the slider to the right to increase the saturation
level; move the slider to the left to decrease the saturation level. The range of adjustment is –100 to 100; the default
setting is 0 (zero).
Contrast: Controls gradations between the darkest and lightest portions of the scene. Move the slider to the right to
increase the contrast; move the slider to the left to decrease the contrast. The range of adjustment is –100 to 100; the
default setting is 0 (zero).
Brightness: Controls the lighting detail in a scene. Move the slider to the right to lighten the image; move the slider to the
left to darken the image. The range of adjustment is –100 to 100; the default setting is 0 (zero).
Hue: Controls the color in a scene. Move the slider to the right to achieve a cool color image; move the slider to the left to
achieve a warm color image. The range of adjustment is –100 to 100; the default setting is 0 (zero).
Check Lock Settings box to lock the above Digital processing settings.