User Manual

54
3.2.4.2 Audio Configuration
The Audio Configuration page allows you to setup the audio device. The default setting for Audio is disabled, which means
that no audio is transmitted from the camera. When enabled, audio is transmitted from the camera to the PC. Based on your
system configuration, images and audio may not be synchronized.
NOTE: Improper use of audio/visual recording equipment may subject you to civil and criminal penalties. Applicable laws
regarding the use of such capabilities vary between jurisdictions and may require, among other things, express written consent
from the recorded subjects. You are solely responsible for insuring strict compliance with such laws and for strict adherence to
any/all rights of privacy and personality.
FIGURE 3-32: AUDIO CONFIGURATION
Audio In
 Enabled
Set to Enabled when receiving audio from a microphone plugged into the unit.
 Disabled
Set to Disabled to close Audio In.
Encoding
Two audio codecs G711-Alaw/G711-Ulaw can be chosen from.
Level
The selectable sound levels are High, Mid, and Low.
NOTE: Changes to these settings cause video to restart.
3.2.4.3 Local Recording
Local Recording enables users to record and save video files locally on the SD card inserted, instead of recording and saving
them over the network that will occupy a huge portion of memory and bandwidth. Check to enable this type of recording. Note
that once the card is full, the oldest and previously-recorded video files on the card will be overwritten when the option “Enable
Continuous Recording” is checked.
FIGURE 3-33: LOCAL RECORDING