User Manual

58
 Username
Click in the Username box and type a user name (2 to 23 alphanumeric characters). User names are case-sensitive.
 Password
Click in the Password box and type a password (4 to 16 alphanumeric characters). Passwords are case-sensitive.
 Re-type Password
Click in the Retype Password box and retype your password.
Click the Save button to save the settings and create a new user (the new user profile appears in the box on the left side of the
page), or click the Reset button to clear all of the information you entered without saving it.
Deleting a User
1. Click the user profile that you want to delete from the defined users section located in the box on the left side of the
page.
2. Click the Delete User button. A dialog box appears with the message “Are you sure you want to delete this user?”
3. Click OK. The user profile is deleted from the defined user profiles section.
NOTE: The default “admin” user cannot be deleted.
3.2.6 Events
Use the Events tab to configure camera events detections and the following handlers. Events detections are activated by
user-defined event sources that tell the device how to react when a specific event occurs. Event handlers are the actions that
the device takes when an event occurs. For example, an event source can be configured to alarm an operator via sending
email notification if a motion occurs within the predefined camera’s coverage.
FIGURE 3-38: EVENTS SETTINGS