User Manual

62
4. Password: Input the password associated with Username.
NOTE: The default Username and Password are “guest” and “1234”.
Settings
1. Set Pre-event Snapshots, Post-event Snapshots, Pre-event Snapshot Interval, and Post-event Snapshot
Interval for Alarm, Motions 1 through 4, Sabotage Detection, Schedule, and Audio Detection selected.
2. Click the Save button to save the settings, or click the Reset button to clear all of the information you entered
without saving it.
Snapshot Naming
By setting File Name Prefix and Server Path for Alarm, Motions 1 through 4, Sabotage Detection, Schedule, and Audio
Detection selected, you will be able to save an image to a defined FTP server when any of your selected events is activated.
Set the Server Path where the data is to be stored on the server.
FIGURE 3-45: SNAPSHOT NAMING
You can also set Trigger Interval time and determine the recording condition: OFF, All Day, Schedule 1, or Schedule 2 from
scheduled table during 24/7 for Schedule. The trigger interval can be adjusted on a scale bar with its corresponding seconds
shown in the box underneath.
FIGURE 3-46: FTP UPLOAD HANDLER SCHEDULED SETTINGS