User Manual

63
3.2.6.6 Relay Open/Close Handler
Define the relay related settings for alarm output device when a selected event is triggered under this page. The connected
relay external device can be activated by the method of Normally Open or Normally Closed.
FIGURE 3-47: RELAY OPEN/CLOSE HANDLER SETTINGS
Relay Open/Close Handler
1. Check any or all of the Alarm, Motion 1 through 4, Sabotage Detection and Audio Detection options from the
Enabled section to activate relay handler when any of the selected events occur.
2. Select Normally Open or Normally Close from the drop-down menu of Polarity for the relay handler.
3. Move the On Time slider to set the amount of time that the relay will remain open. The time range is 0.1 to 200
seconds; the default setting is 0.1.
4. Move the Off Time slider to set the amount of time that the relay will remain closed. The time range is 0.1 to 200
seconds; the default setting is 0.1.
5. Click the Save button to save the settings, or click the Reset button to clear all of the information you entered
without saving it.