User Manual
65
Format SD card as FAT32
1. Double click guiformat.exe, the FAT32 Format window will pop up as the figure shows below.
2. Select the hard disk/SD card you want to format as FAT32 from the Drive drop-down menus, and then click Start
button to begin format the hard disk/SD card.
NOTE: Format will erase all information off of the hard disk/SD card. Make sure you have any important files
backed up before you format it.
FIGURE 3-49: FAT32 FORMAT
3. When the progress bar is full, click Close to complete format and exit the format window.
FIGURE 3-50: FAT32 FORMAT COMPLETE