User Manual

9
7. Top Cover: The top cover of the camera.
8. Fool-proofing Design: The design is as a smart isolation to enable/disable auto defog function.
9. Micro SD Card Slot: The slot is for inserting extra micro SD card for file storage.
10. Default & Reset Button:
 Default: Press the button for 6 seconds to restore the camera’s settings back to the factory default.
 Reset: Press the button for below 1 second to reboot the camera.
11. Bottom Conduit Hole: The bottom hole for cable entry.
12. Side Conduit Hole: The side hole for cable entry.
13. Safety Wire Cord: The cord designed to connect with safety wire for additional suspension.
14. Digital I/O Connectors:
 Audio In: Via “Au/I” and “GND” ports, connect to external device like microphone that receives sound for camera.
 Audio Out: Via “Au/O” and “GND” ports, connect to device like speaker to be triggered through alarm output signals.
 Alarm Out: Via “COM” and “AO” ports, connect to external device to be triggered through alarm output signals.
 Alarm In: Via “GND” and “AI” ports, connect to external device that can trigger alarm input signals.
15. Power Terminal: The port is to connect with external either DC 12V or AC 24V power supply.
16. RJ-45 Network Port: Connect the RJ-45 connector to this port with a PoE+ (Class 4) compatible network
device that supplies power through the Ethernet cable.
17. LED Indicators:
 Green LED: With solid green, the LED indicates a live connection is established.
 Orange LED: With flashing orange, the LED indicates data is being transmitted / received between camera
and Internet.