Data Sheet

PRODUCT SPECIFICATION
camera solutions
C2929 / REVISED 3-27-15
International Standards
Organization Registered Firm;
ISO 9001 Quality System
ES40E/ES41E Series IP Positioning System
ES40E/ES41E ESPRIT
®
SE IP, H.264, DIGITAL STANDARD AND PRESSURIZED MODELS
Product Features
• Receiver, Pan/Tilt, and Enclosure with Integrated Optics Package
(IOP) or Pressurized Integrated Optics Cartridge (IOC), NTSC/PAL
• Tilt Range of +34° to –83° from Horizontal
• Ability to Control and Monitor Video Over IPv4 and IPv6 Networks
• H.264, MPEG-4, and MJPEG Compression
• Multilevel Password Protection
• Autotracking
• Horizontal Zone and Window Blanking
• On-Screen Compass and Tilt Display
• 256 Configurable Preset Positions
• Open IP Standards
Pelco’s ES40E/ES41E Esprit
®
SE IP Positioning System features a
receiver, pan/tilt, enclosure, and either an Integrated Optics Package
(IOP) or a pressurized Integrated Optics Cartridge (IOC) in a single,
easy-to-install system. Options include IOP or IOC models with or
without wiper.
The ES41E Series includes a window wiper. The wiper is completely
integrated into the enclosure and does not interfere with the viewing
range of the system. The wiper can be configured to delay between
wipes and to automatically shut off after a specified period. The
wiper design also allows for easy replacement of the wiper blade.
A built-in heater, window defroster/defogger, sun shroud, and
insulation blanket are standard features on the ES40E/ES41E units,
which also include open collector auxiliary output that functions for
two seconds before deactivating.
Esprit SE IP systems incorporate all of the features and functions of
Esprit SE, while allowing you to control and monitor video over an IP
network from virtually anywhere in the world. Esprit SE IP is a
high-speed positioning system with a built-in 100Base-TX network
interface for live streaming to any network application.
Esprit SE IP supports two simultaneous video streams. The two
streams can be compressed in H.264, MPEG-4, and MJPEG formats
across several resolution configurations. The streams can be
configured in a variety of frame rates, bit rates, and group of pictures
(GOP) structures for additional bandwidth administration. The H.264
compression video files are up to 20 times smaller than MJPEG,
making network video storage more affordable.
Web Interface
Esprit SE IP uses a standard Web browser for powerful remote setup
and administration.
Network protocols such as Secure Sockets Layer (SSL) configuration
for security certificates, Secure Shell (SSH) for remote login, and
Quality of Service (QoS) for priority or guaranteed data flow can be
managed using a Web browser.
Video Systemization
Esprit SE IP easily connects to Pelco IP and hybrid systems such as
Endura
®
version 1.5 (or later), MPEG-4; Endura version 2.0 (or later),
H.264; Digital Sentry
®
version 7.3 (or later); DX8100 version 2.0 (or
later); DX4700/DX4800 Series 1.1 (or later); DX4700HD/DX4800HD
Series v2.0 (or later); and DVR5100 version 1.5.4 (or later). The camera
also features open architecture connectivity to third-party software.
Pelco offers an application programming interface (API) and software
developer’s kit (SDK) for interfacing with Pelco’s IP cameras.