User's Manual

C2458M-E (10/06) 9
HOW TO UPLOAD SOFTWARE USING A PC (SPECTRA AND EXSITE
SYSTEMS)
1. Click the application icon located on the PC desktop.
2. Insert the Resource CD into the CD drive. Click the Browse button. Select the CD drive and the
software file. Select the protocol for the system, system address, and port (COM1 or COM2).
Click the Upload button.
3. Wait until "Done" appears on the screen before unplugging the interface cable (IPS-CABLE).
WARNING: To upload software using the IPS-RDPE-2 remote data port, the following system
software must be installed:
• Spectra III dome drive must have software version 1.2 or highter installed.
• ExSite explosionproof system must have software version 1.13 or higher installed.
Software cannot be uploaded to an Esprit system.
WARNING: To prevent damage to the system, never cycle power or attempt control of the
system during the upload process. The upload process is not complete until the system
reboots and the "Configure Done" message appears on the monitor.