Data Sheet

PRODUCT SPECIFICATION
camera solutions
C1300 / REVISED 8-19-09
International Standards
Organization Registered Firm;
ISO 9001 Quality System
ExSite
®
Series Explosionproof Positioning System
PAN/TILT SYSTEM WITH IOP CAMERA AND OPTIONAL WIPER
Product Features
• Electropolished 316L Stainless Steel Construction
• Upright or Inverted Operation
• Receiver, Pan/ Tilt, and Enclosure with an Integrated Optics
Package (IOP)
• 2 Autofocus, High Resolution Integrated Optic Packages
– 23X Day/Night, 80X Wide Dynamic Range, Motion Detection, and
540 TVL Horizontal Resolution
– Color 22X EXview HAD
™
• Multilingual On-Screen Menus
• Password Protection
• Programmable Camera Settings
• On-Screen Compass, Tilt, and Zoom Display
• Variable Speed Pan: 0.1° to 40°/second with Proportional Pan
• 360° Continuous Pan Rotation
• Tilt Range of +90° to -90° from Horizontal
• Preset Positioning, Patterns, Multiple Scan Modes
• Designed for Minimal Maintenance
• Built-in System Memory
• Software Update and Setup Through Remote Data Port (IPS-RDPE-2)
• Password Protection to Prevent Unauthorized Changes to the System
• On-Board Connector for
– Pelco VC-UTP Video Converter
– Pelco TXB Series Translator Boards for Use with Hernis and Other
Protocols
– Pelco FS85011A and Third-Party Fiber Optic Transmitters
The ExSite
®
Series are innovative integrated positioning systems that
meet stringent explosionproof requirements. The ExSite Series not
only combine a receiver, pan/tilt, and enclosure in a single, easy-to-
install system, but also includes an Integrated Optics Package (IOP). The
Integrated Optics Package contains an autofocus camera and lens
module with programmable features.
For a wide range of applications, the ExSite Series feature a choice of
two different IOP cameras: a high resolution camera with LowLight
™
color technology and 22X zoom lens (22X optical, 12X digital), and a high
resolution day/night camera with a removable infrared cut filter and
23X zoom lens (23X optical, 12X digital).
The electropolished 316L stainless steel construction makes the
ExSite Series ideal for all kinds of environmental conditions including
marine applications. The system has an absolute operating
temperature range of -76° to 140°F (-60° to 60°C). Within two hours
after power-up, the entire unit can de-ice and be operational from a
temperature of -13°F (-25°C).
The ExSite Series include an optional window wiper. The wiper is
completely integrated into the enclosure and does not interfere with the
viewing range of the system. The wiper can be programmed to delay
between wipes and to automatically shut off after a specified period.
A built-in heater, window defroster/defogger, sun shroud, and blower
are standard features on the ExSite Series . All units also include three
auxiliary output relays that can be programmed for a variety of uses.
The ExSite Series variable pan and tilt speeds range from
0.1 to 40 degrees per second in manual pan, tilt, and preset mode.
The ExSite Series is capable of 360 degrees of continuous pan
rotation. The tilt range allows for horizontal viewing of
-90 to +90 degrees. There are 80 preset positions with a preset
accuracy of ±0.1 degree.
The systems are available with an input voltage of 24 VAC or with a
power source of 100 to 240 VAC. The ExSite Series also have a power-
up recovery mode that allows the user to specify what operation the
system will resume whenever the power is cycled.
ExSite Series feature built-in system memory in the power module to
store camera and location-specific pan/tilt settings, including labels,
presets, patterns, and zones. These settings are automatically down-
loaded if a new pan and tilt body is installed.
SHOWN WITH WXM100 WALL MOUNT
(NOT SUPPLIED)