Installation Manual

16 C2271M (9/13)
Specifications
CAMERA
Imaging Device 1/3-inch
Imager Type CMOS
Imager Readout Progressive scan
Maximum Resolution 3 MPx (2048 x 1536)
2 MPx (1920 x 1080)
1 MPx (1280 x 1024)
0.5 MPx (800 x 600)
Signal-to-Noise Ratio >60 dB
Auto Back Focus Yes
Electronic Shutter Range 1 ~ 1/77,000 sec
True Wide Dynamic Range Up to 100 dB*
White Balance Range 2,000° to 10,000°K
Sensitivity f/1.2; 2,850°K; SNR >20 dB
Color (33 ms) 0.1 lux
Color (500 ms) 0.005 lux
Mono (33 ms) 0.05 lux
Mono (500 ms) 0.0013 lux
Day/Night Capabilities Yes
Mechanical IR Cut Filter Yes, (ON/OFF/AUTO selectable), with different set points on lux
*Sensor level is not inclusive of SureVision image processing.
MECHANICAL
Lens Mount CS mount; adjustable
Auto Iris Type DC drive
Camera Mount 1/4 in. UNC-20 screw;
top and bottom of camera housing
ELECTRICAL
Network Port RJ-45 connector for 100Base-TX
Auto MDI/MDI-X
Accessory Port Micro B USB connector for Pelco accessories
Cable Type Cat5 or better for 100Base-TX
Input Power PoE (IEEE 802.3af, Class 3)
Power Consumption
†
9 W nominal
Current Consumption 350 mA maximum
Local Storage Micro SD
Alarm
Input 10 VDC maximum, 5 mA maximum
Output 0 to 15 VDC maximum, 75 mA maximum
Relay Output 32 VDC maximum, 150 mA maximum
†
Does not include optional accessories connected to accessory port.