Operation Manual
Table Of Contents
- IME and IXE Series Network IP Cameras
- Important Notices
- Introduction
- Operation
- Zoom and Focus Controls
- Live Video Page
- Settings Page
- System Tab
- Changing the Device Name
- Enabling LEDs
- Configuring SMTP Server
- Configuring Time Server Settings
- Customizing the Appearance of the Text Overlay
- Customizing the Appearance of the Image Overlay
- Generating a System Log
- Rebooting the Camera
- Restoring All Camera Defaults
- Downloading a Full Backup of Camera Settings
- Uploading a Backup File to Restore Camera Settings
- Network Tab
- Imaging Tab
- Configuring the Orientation of the Scene
- Changing the Digital Processing Settings
- Selecting Exposure Settings
- Day Night Settings
- Configuring Manual Focus Settings
- Selecting Tone Map Settings
- Turning On Window Blanking
- Turning Off Window Blanking
- Deleting a Window Blanking Area
- Restoring Window Blanking Defaults
- A/V Streams Tab
- Users Tab
- Events Tab
C2270M (7/13) 11
Licensing Settings
The Licensing page provides an interface to add specialized features to your Sarix
®
device. Refer to license-specific documentation for more
information about installing licenses and the effects that a license might have on your device.
Backup and Restore Settings
The backup and restore settings page includes configurable fields for backup and restore of camera settings. Once the camera settings have
been configured for optimal scene display, use the backup feature to save the camera settings. If the camera settings are changed and
inadvertently result in a less desirable image, use the restore feature to restore the camera to the previously saved settings.
NOTE: This feature is not intended for the configuration of multiple units or for firmware upgrades.
Information Settings
The information settings page includes read-only fields for the firmware version, hardware version, model number, and serial number of the
camera. This information is typically required by Pelco Product Support for troubleshooting purposes.
Snapshot Viewer
The Snapshot Viewer page displays a list of snapshots saved to the SD card when a “Write JPEG to SD Card” event handler is activated. From
this page, you can open, download, or delete snapshots from the SD card. There are 100 snapshots displayed per page.
CHANGING THE DEVICE NAME
1. Place your mouse pointer over the System tab.
2. Select General Settings from the drop-down menu.
3. Click the Device Name box and highlight the text.
4. Type a user-friendly name into the Device Name box (2 to 63 characters). A user-friendly name makes it easier to recognize the device on
the network. Examples of user-friendly names are Front Door, Lobby, or Parking Lot.
5. Click Save to save the new device name, or click Reset to restore to the previously saved device name.
ENABLING LEDS
1. Place your mouse pointer over the System tab.
2. Select General Settings from the drop-down menu.
3. Select On or Off beside the Enable LEDs button to turn the camera’s power LED on or off. The default setting is Off for IME Series dome
cameras. The default setting is On for IXE Series box cameras.
4. Click Save to save the new setting, or click Reset to restore to the previously saved setting.
CONFIGURING SMTP SERVER
1. Place your mouse pointer over the System tab.
2. Select General Settings from the drop-down menu.
3. Click the SMTP Server box and type the address for the SMTP server used to deliver email from this camera's event system.
4. Click Save to save the new setting, or click Reset to restore to the previously saved setting.