Operation Manual
Table Of Contents
- IME and IXE Series Network IP Cameras
- Important Notices
- Introduction
- Operation
- Zoom and Focus Controls
- Live Video Page
- Settings Page
- System Tab
- Changing the Device Name
- Enabling LEDs
- Configuring SMTP Server
- Configuring Time Server Settings
- Customizing the Appearance of the Text Overlay
- Customizing the Appearance of the Image Overlay
- Generating a System Log
- Rebooting the Camera
- Restoring All Camera Defaults
- Downloading a Full Backup of Camera Settings
- Uploading a Backup File to Restore Camera Settings
- Network Tab
- Imaging Tab
- Configuring the Orientation of the Scene
- Changing the Digital Processing Settings
- Selecting Exposure Settings
- Day Night Settings
- Configuring Manual Focus Settings
- Selecting Tone Map Settings
- Turning On Window Blanking
- Turning Off Window Blanking
- Deleting a Window Blanking Area
- Restoring Window Blanking Defaults
- A/V Streams Tab
- Users Tab
- Events Tab
C2270M (7/13) 13
GENERATING A SYSTEM LOG
1. Place your mouse pointer over the System tab.
2. Select General Settings from the drop-down menu.
3. Click the Generate System Log button.
4. A dialog box opens, allowing you to open or save the file.
5. Save the file to create a system log that can be used by Pelco Product Support for troubleshooting. Contact Pelco Product Support at
1-800-289-9100 (USA and Canada) or +1-559-292-1981 (international).
REBOOTING THE CAMERA
1. Place your mouse pointer over the System tab.
2. Select General Settings from the drop-down menu.
3. Click the Reboot Camera button to restart the camera.
NOTE: Rebooting the camera does not change the configured camera settings.
RESTORING ALL CAMERA DEFAULTS
1. Place your mouse pointer over the System tab.
2. Select General Settings from the drop-down menu.
3. Click the Restore All Camera Defaults button to restore the camera’s factory default settings.
NOTE: If the device is not connected to a Dynamic Host Configuration Protocol (DHCP) network, the IP address settings for the device will be lost
and the server will not recognize the device. The default setting for the device IP address is DHCP On.
DOWNLOADING A FULL BACKUP OF CAMERA SETTINGS
1. Place your mouse pointer over the System tab.
2. Select Backup and Restore from the drop-down menu.
3. Click the Download Now button. A file download dialog box opens.
4. Click Save and specify where you want to save the file.
5. Click OK to save the backup file, or click Cancel to stop the operation.
WARNING: This process cannot be undone; all user and custom settings will be lost.