Operation Manual
Table Of Contents
- IME and IXE Series Network IP Cameras
- Important Notices
- Introduction
- Operation
- Zoom and Focus Controls
- Live Video Page
- Settings Page
- System Tab
- Changing the Device Name
- Enabling LEDs
- Configuring SMTP Server
- Configuring Time Server Settings
- Customizing the Appearance of the Text Overlay
- Customizing the Appearance of the Image Overlay
- Generating a System Log
- Rebooting the Camera
- Restoring All Camera Defaults
- Downloading a Full Backup of Camera Settings
- Uploading a Backup File to Restore Camera Settings
- Network Tab
- Imaging Tab
- Configuring the Orientation of the Scene
- Changing the Digital Processing Settings
- Selecting Exposure Settings
- Day Night Settings
- Configuring Manual Focus Settings
- Selecting Tone Map Settings
- Turning On Window Blanking
- Turning Off Window Blanking
- Deleting a Window Blanking Area
- Restoring Window Blanking Defaults
- A/V Streams Tab
- Users Tab
- Events Tab
20 C2270M (7/13)
SELECTING SNMP SETTINGS
1. Place your mouse pointer over the Network tab.
2. Select SNMP from the drop-down menu.
3. Select the SNMP version to configure: SNMP V2c or SNMP V3. The default setting is No SNMP Server, which disables the SNMP
configuration.
NOTE: SNMP V2c and SNMP V3 configuration settings are independent of each other, but only one SNMP version can be active at a time.
CONFIGURING SNMP V2C
1. Place your mouse pointer over the Network tab.
2. Select SNMP from the drop-down menu.
3. Select SNMP V2c for the SNMP version.
4. Type the community name in the Community String box. The default name for the Community String is ”public.”
5. Configure the Trap Configuration settings:
Address: Type the host name or IP address of the trap server.
Community String: Type the community name for the trap server.
6. Click the Save button to save the settings, or click the Reset button to clear all of the information you entered without saving it.
CONFIGURING SNMP V3
1. Place your mouse pointer over the Network tab.
2. Select SNMP from the drop-down menu.
3. Select SNMP V3 for the SNMP version.
4. Type the SNMP user name in the SNMP user box.
5. Select the encryption algorithm for authentication from the Authentication drop-down menu. Support authentication settings include None,
MD5, or SHA. If you use authentication method MD5 or SHA, type a password in the box to the right of the selected Authentication
encryption.
6. Select the privacy encryption algorithm setting from the Privacy drop-down menu. Supported encryption settings include None, DES, or
AES. If you use privacy method DES or AES, type a password in the Privacy text box.
7. Type the host name or IP address of the trap server in the Address box under Trap Configuration.
8. Click the Save button to save the settings, or click the Reset button to clear all of the information you entered without saving it.
WARNING: The Simple Network Management Protocol (SNMP) settings are advanced controls. Contact your network administrator to
obtain the required information to configure SNMP settings.