Operation Manual

26 C2270M (7/13)
DELETING A WINDOW BLANKING AREA
1. Place your mouse pointer over the Imaging tab.
2. Select Window Blanking from the drop-down menu.
3. In the Edit Window area of the page, click the Delete button “X” next to the window blanking area you want to delete.
4. Click the Save button to save the settings, or click the Reset button to clear all of the information you entered without saving it.
RESTORING WINDOW BLANKING DEFAULTS
1. Place your mouse pointer over the Imaging tab.
2. Select Window Blanking from the drop-down menu.
3. Click the Restore Settings to Defaults button. All defined windows are deleted, and the Window Blanking settings are restored to the
default settings of Off.
A/V Streams Tab
Use the A/V Streams tab to configure the video and audio streams for the camera. The A/V Streams tab includes video presets settings, and
video and audio configuration.
Video Presets Settings
The video preset settings page includes three fully-configured video presets, High, Medium, and Low, which include primary and secondary video
stream settings for easy setup. These presets can also be used as a starting point for a custom video configuration. These preset configurations
vary depending on camera model.
Video Configuration Settings
The video configuration settings page allows you to customize the compression, resolution, image rate, bit rate, and I-frame interval of the video
streams. The default names for the streams are Primary Stream and Secondary Stream. Although each stream can be configured independently,
the settings of one stream can limit the options available to the other stream, depending on the processing power used.
NOTE: Always configure the primary stream before the secondary stream. The primary stream should always be the most resource-intensive of
the streams.
Audio Configuration Settings
The audio configuration settings page allows you to set up the internal audio device or an external audio device. The default setting for audio is
disabled, which means that no audio is transmitted from the camera. When enabled, audio is transmitted from the camera to the PC. Based on
your system configuration, images and audio might not be synchronized.
Not all camera models are equipped with an internal audio device. Refer to the specifications for your camera model for information.
NOTE: Improper use of audio/visual recording equipment might subject you to civil and criminal penalties. Applicable laws regarding the use of
such capabilities vary between jurisdictions and might require, among other things, express written consent from the recorded subjects. You are
solely responsible for ensuring strict compliance with such laws and for strict adherence to any/all rights of privacy and personalty.
SELECTING A VIDEO PRESET CONFIGURATION
1. Place your mouse pointer over the A/V Streams tab.
2. Select Video Presets from the drop-down menu.
3. Click the button next to the desired video preset stream configuration.
4. Click the Save button to save the settings, or click the Reset button to clear your selection without saving it.