Operation Manual
Table Of Contents
- IME and IXE Series Network IP Cameras
- Important Notices
- Introduction
- Operation
- Zoom and Focus Controls
- Live Video Page
- Settings Page
- System Tab
- Changing the Device Name
- Enabling LEDs
- Configuring SMTP Server
- Configuring Time Server Settings
- Customizing the Appearance of the Text Overlay
- Customizing the Appearance of the Image Overlay
- Generating a System Log
- Rebooting the Camera
- Restoring All Camera Defaults
- Downloading a Full Backup of Camera Settings
- Uploading a Backup File to Restore Camera Settings
- Network Tab
- Imaging Tab
- Configuring the Orientation of the Scene
- Changing the Digital Processing Settings
- Selecting Exposure Settings
- Day Night Settings
- Configuring Manual Focus Settings
- Selecting Tone Map Settings
- Turning On Window Blanking
- Turning Off Window Blanking
- Deleting a Window Blanking Area
- Restoring Window Blanking Defaults
- A/V Streams Tab
- Users Tab
- Events Tab
42 C2270M (7/13)
ZONES
A zone is a defined boundary or area that is monitored by a configured behavior. A zone can be defined by a box, polygon, or line. If a box or
polygon is drawn to define the zone, any motion in the defined direction triggers an alarm. For example, if a line is drawn to define the zone, any
motion that crosses the line in the defined direction triggers an alarm. Objects within a zone can also be excluded and sized.
Draw Zone Tools
NOTE: The available zone drawing tools depend on the configured analytic behavior.
Drawing a Zone
1. Place your mouse pointer over the Events tab.
2. Select Analytic Configuration from the drop-down menu.
3. Click a behavior located in the Select Behaviors section.
4. Check the Activate Behavior box located in the “Settings for [behavior name]” section. A check mark appears to the left of the selected
behavior(s) located in the Select Behaviors section.
5. Use the draw tools to define the zone.
6. Set the behavior-specific settings for the zone.
7. To draw another zone, repeat steps 5 and 6.
8. Click the Save button to save the settings, or click the Reset button to clear all of the information you entered without saving it.
Deleting a Zone
1. Place your mouse pointer over the Events tab.
2. Select Analytic Configuration from the drop-down menu.
3. Click the behavior located in the Select Behaviors section that you want to modify.
4. The settings for the behavior are displayed in the “Settings for [behavior name]” section.
5. In the “Zone list” area of the page, click the check box next to the zone you want to delete.
6. Click the Save button to save the settings, or click the Reset button to clear all of the information you entered without saving it.
Box: Tracks objects in a defined zone and triggers an alarm if the objects move in the same direction as defined.
Polygon: Tracks objects in a defined zone and triggers an alarm if the objects move in the same direction as defined.
Line: Tracks objects that cross a line and triggers an alarm if the objects move in the same direction as defined.
Exclude Zone Box Tool: Ignores objects inside a defined zone.
Exclude Zone Polygon Tool: Ignores objects inside a defined zone.
Object Size Filter: Sets the minimum and maximum object size for a zone.