Operation Manual
Table Of Contents
- IME and IXE Series Network IP Cameras
- Important Notices
- Introduction
- Operation
- Zoom and Focus Controls
- Live Video Page
- Settings Page
- System Tab
- Changing the Device Name
- Enabling LEDs
- Configuring SMTP Server
- Configuring Time Server Settings
- Customizing the Appearance of the Text Overlay
- Customizing the Appearance of the Image Overlay
- Generating a System Log
- Rebooting the Camera
- Restoring All Camera Defaults
- Downloading a Full Backup of Camera Settings
- Uploading a Backup File to Restore Camera Settings
- Network Tab
- Imaging Tab
- Configuring the Orientation of the Scene
- Changing the Digital Processing Settings
- Selecting Exposure Settings
- Day Night Settings
- Configuring Manual Focus Settings
- Selecting Tone Map Settings
- Turning On Window Blanking
- Turning Off Window Blanking
- Deleting a Window Blanking Area
- Restoring Window Blanking Defaults
- A/V Streams Tab
- Users Tab
- Events Tab
C2270M (7/13) 7
Operation
CAMERA CONFIGURATION SEQUENCE
Once the device is installed and power is applied, the device undergoes a configuration sequence. The configuration sequence takes
approximately two minutes to complete, and then the device will come on line.
NOTE: If the device is not connected to a Dynamic Host Configuration Protocol (DHCP) server and DHCP is enabled, the configuration sequence
might take up to five minutes to complete.
MINIMUM SYSTEM REQUIREMENTS
Processor: Intel
®
Core
™
i3 Processor, 2.4 GHz
Operating system: Microsoft
®
Windows
®
7 (32-bit and 64-bit), or Windows Vista
®
; or Mac
®
OS X 10.4 (or later)
Memory: 4 GB RAM
Network interface card: 100 megabits (or greater)
Monitor: Minimum of 1024 x 768 resolution, 16- or 32-bit pixel color resolution
Web browser: Internet Explorer
®
7.0 (or later) or Mozilla
®
Firefox
®
3.5 (or later); Internet Explorer 8.0 (or later) is recommended for configuring
analytics
Media player: Pelco Media Player or QuickTime
®
7.6.5 for Windows XP, Windows Vista, and Windows 7; or QuickTime 7.6.4 for Mac OS X 10.4
(or later)
NOTES:
• Internet Explorer is not supported by Mac OS X 10.4.
• Pelco Media Player is recommended for control, smoothness, and reduced latency as compared to QuickTime.
• This product is not compatible with QuickTime version 7.6.4 for Windows XP or Windows Vista. If you have this version installed on your PC,
you will need to upgrade to QuickTime version 7.6.5.
• Network and processor bandwidth limitations might cause the video stream to pause or appear pixelated when additional Web-interface
users connect to the camera.
ACCESSING THE IP CAMERA
The first time you access the camera, the live video page appears. By default, you are viewing the video as a public user and only have access to
the single stream live view.
If, for security purposes, users should not be allowed to view video without first logging on to the camera, change the permissions for public
users.
LOGGING ON TO THE CAMERA
1. Open the Web browser.
2. Type the camera’s IP address in the browser address bar.
NOTE: If you do not know the camera’s IP address, you can locate it using the Pelco Device Utility software.
3. Click the Login button in the navigation bar; a dialog box opens.
4. Type your user name and password.
NOTE: If you are logging on to the camera as the administrator for the first time, the default user name and password are admin
(all lowercase). For security purposes, be sure to change the password after you log on for the first time.
5. Click Log In.