Operation Manual
Table Of Contents
- Important Notices
- Locating Updates and Other Resources
- Accessing the Camera
- Accessing the Live View
- Using the System Menu
- Using the Network & Security Menu
- Configuring Firewall Settings
- Using the Imaging Menu
- Using the A/V Streams Menu
- Using the Events Menu
- Configuring Sources
- Configuring Handlers
- Configuring an Event Handler: Send Email
- Configuring an Event Handler: Upload JPEG to FTP Server
- Configuring an Event Handler: Write JPEG to SD Card
- Configuring an Event Handler: Open/Close Relay
- Configuring an Event Handler: Display Overlay
- Configuring an Event Handler: Play Audio
- Configuring an Event Handler: Write Recording to SD Card
- Configuring an Event Handler: Upload Recording to FTP Server
- Deleting an Event Handler
- Analytic Configuration
- Event Stream
- Contacting Pelco for Troubleshooting
Sarix Enhancedī3 Operations Manual, Dome, Bullet, and BoxīCameras
C6652M | 06/20
11
3. Select the location in which to save the log file.
4. Select Save.
Rebooting a Camera
If you are recording video from your camera, restarting the camera will cause a gap in video recording. It is
important that you schedule maintenance before restarting the camera.
To restart the camera, select Reboot Camera.
Restoring All Camera Defaults
If necessary, you can reset your camera settings to the factory defaults.
1. Go to System > General Settings.
2. Select Restore All Camera Defaults.
3. Select Hard or Soft Restore.
l Soft Restore will reset the camera back to factory defaults with the exception of network
settings. All user settings and customizations will be lost and cannot be recovered.
l Hard Restore will reset the camera back to factory defaults. All user settings and
customizations and network settings will be lost and cannot be recovered.
4. Select Upload and Restore to restart and restore you camera's settings.
Backing Up and Restoring Settings
You can create a backup file of your device's configuration so that if you accidentally change a setting or
need to recover from a factory reset, you can revert back to this saved configuration. Camera backup files
are stored in bin format.
Note: The restore feature is not intended to automatically configure multiple devices or to recover
settings following a firmware upgrade.
Back Up Camera Settings
1. Got to System > Backup and Restore.
2. Select Generate Backup File.
3. Select Download Now, and then specify the directory in which to save your backup file.
Restore Camera Settings from a Backup
1. Go to System > Backup and Restore.
2. Select Browse,select the desired backup file, and then select Open.
3. Select Upload and Restore; to restart the camera and restore the camera settings.
Updating Firmware
Go to System > Firmware to access System Information and perform Firmware Updates.
System Information includes read-only fields for the firmware version, hardware version, model number,
and serial number of the camera. This information is typically required by Pelco Product Support for
troubleshooting purposes.
The camera firmware can be upgraded or downgraded.