I N S T A L L A T I O N KBD5000 Series Keyboard C1620M-F (11/08)
Contents Regulatory Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Parts List . . . . . . . . . . . . . . . . . . . . . .
List of Illustrations 1 2 3 4 5 6 4 Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Product Serial Number Label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Rear Panel Connectors . . . . . . . . . . . . . . . . .
Regulatory Notices This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RADIO AND TELEVISION INTERFERENCE This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules.
Description The KBD5000 Series keyboard is the controller for Pelco’s network-based video system products. All user functions can be accessed from the KBD5000. The KBD5000 Series is configured with three control modules that are installed in receptacles on the keyboard base. The following three modules are included with the base: • A variable speed, vector-solving joystick with keys for lens, iris, and focus control.
PACKAGE CONTENTS When installing the KBD5000, refer to Figure 1. ACCESSORY PACK SAFETY INSTRUCTIONS AND MANUAL KEYBOARD 1 EA. POWER SUPPLY AND USB CABLE 1 EA. USA STANDARD POWER CORD (110 VAC) 1 EA. WRIST SUPPORT 1 EA. SHOWN ACTUAL SIZE PHILLIPS PAN HEAD SCREW 4-40 X .312-INCH 4 EA. EUROPEAN STANDARD POWER CORD (220 VAC) 1 EA. UK STANDARD POWER CORD (250 VAC) 1 EA Figure 1.
Rear Panel Connectors Figure 3. Rear Panel Connectors Input Power USB Type A Port USB Type B Port (attaches to a VCD5000; use the supplied Type B-to-Type A adapter cable) Headphone Connector/Speaker Microphone Connector NOTES: 8 • Any USB cable attached to the keyboard must be no longer than 16.4 feet (5.0 m). • You can use the USB ports to export video, clips, or still images. To do so, the port must be connected to a USB hard drive or USB memory key. USB CD/DVD drives are not supported.
Installation INSTALLING THE WRIST SUPPORT The KBD5000 comes with three control modules that fit in three receptacles on the base. The setup from the factory has the jog/shuttle module installed on the left side of the base, the keypad module in the center, and the joystick module on the right. The KBD5000 also has a wrist support that can be easily installed and removed (the keyboard can be used without the wrist support). This system allows custom tailoring of the keyboard to your preferences.
CONNECTING THE KEYBOARD To hook up the KBD5000, connect the USB Type B-to-Type A cable (supplied) from the USB connector on the rear of the KBD5000 to the USB connector on either the front or rear of the Pelco VCD5000 video console display. (For example, Figure 5 shows a connection to either the rear or front of a VCD5000.) NOTE: Any USB cable attached to the keyboard must be no longer than 16.4 feet (5.0 m). VCD5000 FRONT (BEZEL OFF) OR VCD5000 REAR Figure 5.
Operation The following is a simple guide for operating the KBD5000. For additional details, refer to the VCD5000 Video Console Display Operation manual (C1618M). KEYS AND FUNCTIONS Figure 6.
OVERVIEW OF VCD5000 MENUS The KBD5000 works in conjunction with the VCD5000 video console display and its menus. Refer to the VCD5000 Video Console Display Operation manual (C1618M) for operating information. DISPLAYING AND HIDING THE SYSTEM MENUS To display or hide on-screen menus, press one of the menu keys on the jog/shuttle module. SELECTING A MENU ITEM The following tools can be used to select a menu item: • Joystick: Move between the on-screen menus. • Colored function keys: Select a menu item.
Troubleshooting If you need assistance, contact Pelco Product Support at 1-800-289-9100 (USA and Canada) or +1-559-292-1981 (International). Be sure to have the serial number located on the bottom of the keyboard available in case it is needed. Do not try to repair the keyboard yourself; opening it immediately voids any warranty. Leave maintenance and repairs to qualified technical personnel. Remove the defective unit and return it for repair.
Specifications POWER SUPPLY Input Voltage Output Voltage Power Output Input Connector Type Output Connector Type Cable Type 100–240 VAC, 50/60 Hz 12 VDC 20 W Universal, interchangeable 2.5 mm screw-on barrel Supplied with grounded power cord; molded connector, 3 prongs, 6 ft (1.8 m); 1 USA standard (110 VAC), 1 European standard (220 VAC), 1 UK standard (250 VAC) KEYBOARD BASE Keyboard Interface USB 2.0 Cable USB, captive, 16.4 ft (5.0 m) Input Voltage 12 VDC Input Current 1.
PRODUCT WARRANTY AND RETURN INFORMATION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment.
www.pelco.com Pelco, Inc.
