User's Manual

C1528M-F (6/05) 41
CM6800E PROGRAMMING MODE
1. If you have not already done so, select the monitor (KBD960/KBR960: if the Camera menu appears, press to exit).
2. Press the PGM key (or select
PGM
on the KBD960/KBR960). The Password screen appears.
Note that on the KBD960/KBR960 you must first select
and
DEF
. Then enter the Define PIN (Default: 1234), and select
MENU
.
NOTE: When using the CM6800E as a satellite device in a CM9760 system, you can access the CM6800E programming screens from the
CM9760-KBD keyboard if you are viewing a camera controlled by the CM6800E. Refer to the Using the CM6800E as a Satellite Device in a
CM9740/CM9760 System section in the Appendix .
Figure 31. CM6800E Password Screen
3. At the ******* prompt, enter the DEFAULT PASSWORD: 2899100
The Main Menu appears.
Figure 32. CM6800E Programming Main Menu
Select Language
If necessary, select the appropriate language.
1. Navigate to the language displayed below the menu options.
2. Scroll through the languages and select the language appropriate for your system.
3. Navigate to the RETURN field and navigate left or right to return to the Main Menu.
Exit Programming Mode
PELCO VIDEO SWITCHER
MODEL CM6800E
PASSWORD TO MAIN MENU
*******
SCRATCHPAD SEQUENCE
RETURN
MACRO STATUS VIEW
PELCO SWITCHER
MODEL CM6800E
MAIN MENU
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
CAMERA
LOGICAL CAMERA
MONITOR
ACCESS
TIME & DATE
PORT
PRIORITY
SEQUENCE
MACRO
ALARM CONTACTS
EVENT TIMER
SET AUXILIARY
SET PASSWORD
SYSTEM
ABOUT CM6800E
ENGLISH
RETURN