User manual

30 C639M-A (6/04)
WEEKLY RECORDING SCHEDULE
To make sure there is no delay during scheduled recording, begin the recording at least five minutes before the actual recording
time. For example, schedule the recording at 7:55 a.m. instead of 8:00 a.m.
1. Select the “Daily recording schedule” radio button.
2. Click Continuous or “Event record.”
3. In the time bar, click the desired start/end times for recording, or enter the exact start/end times in the “Fine tune” fields.
4. Click Apply.
The example below shows a
Continuous weekly recording schedule from 7:05 a.m. to 12:05 p.m. The boxes in the time bars are
blue with a red border. You can make the boxes smaller or larger by dragging them with your mouse.
Figure 36. Continuous Weekly Recording Schedule Page
The example below shows a weekly
Event record schedule from 7:05 a.m. to 12:05 p.m. The boxes in the time bars are yellow
with a red border. You can make the boxes smaller or larger by dragging them with your mouse.
Figure 37. Weekly Event Recording Schedule Page
To delete a time period:
1. Click “No record.”
2. Click a box in a time bar.