Spec Sheet

TECHNICAL SPECIFICATIONS
GENERAL
Construction
Back Box Assembly
Indoor Aluminum and stainless steel
Environmental Aluminum
Dome Drive Assembly PC-ABS and sheet metal
Lower Dome Assembly
Indoor Polycarbonate and PC-ABS
Environmental Polycarbonate and aluminum
Light Attenuation
Smoked 50% light attenuation
Clear f/0.0 light loss
Cable Entry (back box)
In-Ceiling 0.75-inch conduit fitting
Pendant 1.5-inch NPT pendant mount
Weight (approximate) Unit Shipping
Indoor In-Ceiling 2.79 kg (6.17 lb) 4.41 kg (9.73 lb)
Environmental In-Ceiling 3.09 kg (6.83 lb) 4.71 kg (10.39 lb)
Indoor Pendant 3.10 kg (6.84 lb) 4.67 kg (10.30 lb)
Environmental Pendant 3.12 kg (6.89 lb) 4.69 kg (10.35 lb)
ENVIRONMENTAL
Installation Environment
In-Ceiling Indoor/environmental
Pendant Indoor/environmental
Operating Temperature
Indoor –10° to 50°C (14° to 122°F)
Environmental –40° to 50°C (–40° to 122°F)
Absolute Maximum
Operating Temperature
Indoor 50°C (122°F)
Environmental 74°C (165.2°F) ambient per NEMA TS-2
(para 2.2.7.3 - 2.2.7.7)
Operating Humidity 20% to 80% (noncondensing)
Storage All models
Temperature –40° to 60°C (–40° to 140°F)
Humidity 20% to 80% (noncondensing)
Effective Projected Area (EPA)
Without Mount 869 square centimeters (135 square inches)
With IWM Series Mount 1,592 square centimeters (247 square inches)
MECHANICAL
Pan Movement 360° continuous pan rotation
Tilt Movement +1° to –90°
Preset Speed
Pan 430°/sec
Tilt 200°/sec
Preset Accuracy
Pan ±0.1°
Tilt ±0.05°
Variable Manual Speed
Pan 0.1°/sec to 100°/sec
Tilt 0.1°/sec to 50°/sec
ELECTRICAL
Ports RJ-45 connector for 100Base-TX
Auto MDI/MDI-X;
Autonegotiate/manual setting
Cabling Type Cat5 or better for 100Base-TX
Input Voltage 18 to 32 VAC; 24 VAC nominal
Input Power
Indoor 24 VAC; 26 VA;
PoE+ IEEE 802.3at Class 4, 48 V, 600 mA
Environmental 24 VAC; 50 VA
Alarms
Inputs 4
Output 1; PhotoMOS
™
relay (30 V, 1 A)
Triggers Unsupervised mode that detects switch
closures (N.O. and N.C.)
CERTIFICATIONS/RATINGS
• CE, Class A
• FCC, Class A
• UL/cUL Listed
•C-Tick
• NEMA TS-2 (Temp.) para 2.2.7.3 - 2.2.7.7
•KCC*
• ONVIF Profile S and Profile G Conformant
†
• Models were tested in accordance with:
– IEC 60068-2-1 Low Temperature
– IEC 60068-2-2 High Temperature
– IEC 60068-2-3 High Temperature & Humidity
– IEC 60068-2-6 Product Vibration
– IEC 60068-2-14 Thermal Shock
– IEC 60068-2-27 Product Shock
– IEC 60068-2-52 Salt Fog
– IEC 62262 Impact (IK10)
– IEC 60529 Ingress for Water & Dust (IP66)
– ISTA 2A Package Drop
• Meets Type 4X enclosure and IP66 standards when installed properly
*At the time of this printing, this certification is pending. Please
consult the factory, our Web site (www.pelco.com), or the most
recent B.O.S.S.
®
update for the current status of certifications.
†
Refer to the Pelco Developer Network (pdn.pelco.com) for more
information about ONVIF conformance.