INSTALLATION/OPERATION 500 Series Flat Panel LCD Monitor C2937M-B (12/07)
Contents Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Regulatory Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Description . . . . . . . . . . . . . . . . . . . . . . . . . . .
Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9.
Regulatory Notices This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RADIO AND TELEVISION INTERFERENCE This equipment has been tested and found to comply with the limits of a Class A digital device, pursuant to Part 15 of the FCC Rules.
Description The 500 Series high performance LCD monitors are designed specifically for the security industry and provide high quality display of video or computer signals using multiple inputs. Adjustments of standard monitor display parameters are made using user-friendly, on-screen menus and front panel controls. For viewing multiple cameras simultaneously in high-definition quality on the LCD monitor, Pelco recommends using PMVC4 and PMVR2 multiviewers.
PACKAGE CONTENTS Qty 1 1 1 1 1 1 2 1 Description 23-, 26-, 32-, 37-, or 42-inch TFT LCD monitor with attached stand (removable) US standard power cord EU standard power cord DVI cable VGA cable with 15-pin D-sub connection Remote control unit AAA batteries Installation/Operation manual USER MANUAL 1 EA REMOTE CONTROL 1 EA AAA BATTERIES 2 EA DVI CABLE 1 EA US POWER CORD 1 EA EU POWER CORD 1 EA MONITOR VGA CABLE 1 EA Figure 1.
Installation MOUNTING The monitor can be placed on any flat surface (desk or table), or it can be wall mounted. • For the 23-, 26-, and 32-inch models, Pelco recommends the PMCL-WMT tilt wall mount, the PMCL-CM or PMCL-CMP ceiling mount, and the PMCL-WM1A or PMCL-WM2A articulating wall mounts. The 32-inch model LCD monitor requires an adapter plate (PMCL-V200) to make these mounts compatible. • The 37- and 42-inch models use a PMCP-WM wall mount or the PMCL-CM or PMCL-CMP ceiling mount.
REAR PANEL CONNECTORS DVI IN RGB IN COMPONENT Y DVI IN RGB IN COMPONENT Y L Pb/Cb R Pr/Cr L Pb/Cb R Pr/Cr FRONT PC A-OUT REAR PC A-IN A-OUT2 A-IN2 A-OUT1 A-IN1 S-VHS OUT S-VHS IN V-IN2 V-OUT2 V-IN1 V-OUT1 FRONT PC A-OUT A-OUT2 A-OUT1 S-VHS OUT REAR PC A-IN A-IN2 A-IN1 S-VHS IN AC IN V-IN2 V-OUT2 V-IN1 V-OUT1 AC IN Figure 3. Rear Panel Connectors ì î ï ñ ó r s t u ~í ~â DVI IN: Connection to digital video signals from a computer or any DVI output.
Operation FRONT PANEL CONTROLS MENU SOURCE MENU SOURCE VOL VOL Figure 4. Front Panel Controls ì MENU: Displays the main on-screen menu. î SOURCE: Selects the input source and confirms your choice. ï !and ": Navigates through the on-screen menu. ñ VOL: Increases (#) or decreases ($) the volume. Also selects or adjusts items on the on-screen menu. ó (Power Button): Turns on/off the monitor. r (Remote Control Signal Receiver): Receives remote control signal.
INSTALLING REMOTE CONTROL BATTERIES Figure 5. Battery Installation Refer to Figure 5 for the following procedure. 1. Open and remove the battery cover on the back of the remote control. 2. Install two AAA size batteries (supplied). Match the positive (+) and negative (–) signs on the batteries to the signs on the battery compartment. 3. Close the battery cover. Make sure the lock snaps closed. WARNINGS: 10 • Dispose of batteries in a designated disposal area. Do not throw batteries into a fire.
REMOTE CONTROL FUNCTIONS ì î MUTE POWER ï VIDEO1 VIDEO 2 S-VIDEO ñ POWER: Turns on or off power to the monitor. MUTE: Silences the sound. To return the sound: press MUTE again, VOL +, or VOL -. (Input Source): Displays all the available input sources. Press the button to select the desired input source. (PIP): Controls the PIP (picture-in-picture) as follows: • PIP ON/OFF: Activates/deactivates PIP/PBP mode. RGB DVI • P.SIZE: Selects the size of the subpicture. COMPONENT • P.
ON-SCREEN DISPLAY (OSD) FUNCTION INPUT SOURCE DISPLAY VIDEO 1 VIDEO 1/2 S-VIDEO RGB DVI COMPONENT Figure 7. Input Source Display Menu The input source name is displayed in the upper-right corner. You can change the input source there or by pressing one of the input source keys on the remote control. MENUS The menus are the same for the PMCL523A, PMCL526A, PMCL532A, PMCL537A, and PMCL542A. Since different options are available for different input types, some options may be unavailable.
VIDEO 1, VIDEO 2, S-VIDEO COMPONENT MODE MENU Input Menu MAIN MENU INPUT CONTRAST BRIGHTNESS COLOR SHARPNESS TINT 3D NOISE REDUCTION LANGUAGE PANEL BUTTONS PIP SCAN MODE OSD SETTING COLOR TEMPERATURE DEFAULT SETTING INFORMATION VIDEO 1 VIDEO 2 S-VIDEO RGB DVI COMPONENT Contrast Menu 0 100 Brightness Menu 0 100 PIP Input Menu Color Menu 0 100 VIDEO 1 VIDEO 2 S-VIDEO COMPONENT Sharpness Menu 0 PIP Location Menu T/L T/R B/R B/L 15 PIP Size Menu Tint Menu 0 LARGE SMALL NORMAL 100 3D Noise Reductio
Video 1, Video 2, S-Video, Component Mode Menu Field Definitions Input: Select VIDEO 1, VIDEO 2, S-VIDEO, RGB, DVI, or COMPONENT. Contrast: Adjusts black level of the video screen image (0 to 100). Brightness: Adjusts white level of the video screen image (0 to 100). Color: Adjusts the color saturation of the video signal (0 to 100). Sharpness: Adjusts the picture softer or sharper (0 to 15). Tint: Adjusts the range of color: green to red (0 to 100).
RGB/DVI MODE MENU MAIN MENU INPUT CONTRAST BRIGHTNESS H. POSITION V. POSITION FREQUENCY PHASE AUTO POSITION LANGUAGE PANEL BUTTONS PIP ASPECT RATIO OSD SETTING COLOR TEMPERATURE DEFAULT SETTING INFORMATION VIDEO 1 VIDEO 2 S-VIDEO RGB DVI COMPONENT Contrast Menu 0 100 Brightness Menu 0 100 PIP Input Menu H. Position Menu 0 VIDEO 1 VIDEO 2 S-VIDEO COMPONENT 100 V.
RGB/DVI Mode Menu Field Definitions NOTE: The DVI menu has a more limited selection. It consists of the following options: Input, Contrast, Brightness, Language, Panel Buttons, PIP, Aspect Ratio, OSD Setting, Color Temp., Default Setting, and Information. Input: Select RGB or DVI. Contrast: Adjusts black level of the video screen image (0 to 100). Brightness: Adjusts white level of the video screen image (0 to 100). H-Position: (RGB only; not in DVI mode.) Adjusts the horizontal position (0 to 100).
Mode Tables Table A. RGB/DVI Mode Mode VGA Resolution Vertical Frequency (Hz) 720 x 400 70 640 x 480 50/60/72/75/85 SVGA 800 x 600 56/60/72/75/85 XGA 1024 x 768 60/70/75/80/85 SXGA 1280 x 1024 60 WXGA 1360 x 768 60 WXGA 1366 x 768 60 SDTV 480P 720 x 480 60 SDTV 576P 720 x 576 50 HDTV 720P 1280 x 720 60 HDTV 1080I 1920 x 1080 30 NOTE: The maximum resolution is 1366 x 768 at 60 Hz. Table B.
Maintenance If the quality of the picture is poor and cannot be improved by making adjustments on the front control panel, inspect all system connections and cable runs. WARNING: To reduce the risk of electrical shock, do not remove the cover or back of the monitor. No user-serviceable parts are inside. Refer servicing to qualified personnel, or contact the Pelco Customer Service Department (1-800-289-9100 or 1-559-292-1981) for assistance.
Supported Input Modes Table C. Supported Input Modes Mode Resolution H Freq. (kHz) V Freq. (Hz) 0 720 x 400 31.469 70.000 1 640 x 480 31.460 50.000 2 640 x 480 31.500 60.000 3 640 x 480 37.700 72.000 4 640 x 480 37.500 75.000 5 640 x 480 43.300 85.000 6 800 x 600 35.100 56.000 7 800 x 600 37.900 60.000 8 800 x 600 48.100 72.000 9 800 x 600 46.900 75.000 10 800 x 600 53.700 85.000 11 1024 x 768 48.400 60.000 12 1024 x 768 56.500 70.
Specifications MODELS PMCL523A PMCL526A PMCL532A PMCL537A PMCL542A 23-inch (583 mm) LCD monitor 26-inch (660 mm) LCD monitor 32-inch (800 mm) LCD monitor 37-inch (940 mm) LCD monitor 42-inch (1,067 mm) LCD monitor GENERAL Native Resolution Panel Aspect Ratio Viewing Area PMCL523A PMCL526A PMCL532A PMCL537A PMCL542A Pixel Pitch PMCL523A PMCL526A PMCL532A PMCL537A PMCL542A Video Formats Brightness PMCL526A PMCL523A, PMCL532A, PMCL537A, PMCL542A Contrast Ratio PMCL523A PMCL526A PMCL532A, PMCL537A, PMCL542A B
ELECTRICAL Input Voltage Power Consumption PMCL523A PMCL526A PMCL532A PMCL537A PMCL542A Input Interfaces Video Audio Horizontal Frequency Vertical Frequency Sync Format 100-240 VAC, 50/60 Hz 110 W 120 W 150 W 180 W 220 W 2 BNC, looping; 1 S-Video, looping; 1, RGB; 1 DVI; 1 component 2, audio L/R, RCA jack; 1 stereo mini jack, looping 31 kHz to 69 kHz 50 Hz to 85 Hz NTSC/PAL PHYSICAL Dimensions (without stand) PMCL523A PMCL526A PMCL532A PMCL537A PMCL542A Dimensions (with stand) PMCL523A PMCL526A PMCL532A P
ENVIRONMENTAL Operating Temperature Storage Temperature Operating Humidity Storage Humidity 32° to 104°F (0° to 40°C) -4° to 140°F (-20° to 60°C) 20% to 80% noncondensing 10% to 90% noncondensing OPTIONAL ACCESSORIES Mounts PMCL-CM PMCL-CMP PMCL-WM1A PMCL-WM2A PMCP-WM PMCL-WMT PMCL-VA PMCL-V200 Ceiling mount for PMCL523A, PMCL526A, PMCL532A Ceiling mount for PMCL523A, PMCL526A, PMCL532A Articulating wall mount for PMCL523A, PMCL526A, PMCL532A Articulating wall mount for PMCL523A, PMCL526A, PMCL532A Fixed
PRODUCT WARRANTY AND RETURN INFORMATION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment. Exceptions to this warranty are as noted below: • Five years on fiber optic products and TW3000 Series unshielded twisted pair transmission products. • Three years on Spectra® IV products. • Three years on Genex® Series products (multiplexers, server, and keyboard).
Worldwide Headquarters 3500 Pelco Way Clovis, California 93612 USA USA & Canada Tel: 800/289-9100 Fax: 800/289-9150 International Tel: 1-559/292-1981 Fax: 1-559/348-1120 www.pelco.