I N S TA L L AT I O N / O P E R AT I O N ® PMM9A, PMM12A, PMM15A, PMM20A Monochrome Monitors C2902M (10/02)
CONTENTS Section Page IMPORTANT SAFEGUARDS AND WARNINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 MODELS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
LIST OF ILLUSTRATIONS Figure 1 2 3 4 5 Page Singe-Monitor Installation (PMM15A Shown) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Multiple-Monitor Installation (PMM15A Shown) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Location of Controls (PMM15A Shown) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
IMPORTANT SAFEGUARDS AND WARNINGS Before installing your equipment, please read the following important safeguards as outlined by Underwriters Laboratories Inc. Read Instructions All the safety and operating instructions should be read before the appliance is operated. Retain Instructions The safety and operating instructions should be retained for future reference. Heed Warnings All warnings on the appliance and in the operating instructions should be followed.
Object and Liquid Entry Never push objects of any kind into this CCTV product through openings as they may touch dangerous voltage points or shortout parts that could result in a fire or electric shock. Never spill liquid of any kind on the CCTV product. Servicing Do not attempt to service this CCTV product yourself as opening or removing covers may expose you to dangerous voltages or other hazards. Refer all servicing to qualified service personnel.
DESCRIPTION The PMM9A, PMM12A, PMM15A, and PMM20A are high resolution, black and white, CCTV video monitors. The cabinets are made of steel for ruggedness and, with the exception of the picture tube, the circuitry is all solid-state for reliability. MODELS PMM9A PMM12A PMM15A PMM20A Black and white monitor, 9-inch (22.86 cm) picture display, 96-256 VAC, 50/60 Hz, EIA/CCIR, auto-sensing Same as PMM9A except 12-inch (30.48 cm) picture display Same as PMM9A except 15-inch (38.
MULTIPLE-MONITOR INSTALLATION Refer to Figure 2 and Table A for the following instructions. 1. Connect a 75-ohm video cable from the video source, such as a camera, to the BNC connector labeled VIDEO IN (or INPUT) on the back of the first monitor. 2. Connect a 75-ohm video cable from the VIDEO OUT (or OUTPUT) connector on the back of the first monitor to the VIDEO IN (or INPUT) connector on the second monitor. 3.
OPERATION Controls are located on the front of the monitor. On the PMM9A, PMM12A, and PMM15A, some or all of the controls are behind a hinged cover. Refer to Figure 3. Power On/Off Switch – This rocker switch turns the power on or off. Push the side with the white line to turn on the power. Push the side with the white circle to turn the power off. LED Power Indicator – The LED lights when power is turned on.
MAINTENANCE The only maintenance required is to clean the cabinet and screen periodically. Use a damp cloth to clean the screen. Use mild soap and water to clean the cabinet. Some common household aerosol sprays, cleaning agents, solvents, or polishes may damage the cabinet finish. Dry the cabinet with a soft cloth.
SPECIFICATIONS ELECTRICAL Input Voltage: 96-256 VAC, 50/60 Hz, auto-ranging Power Consumption PMM9A: PMM12A: PMM15A: PMM20A: 28 W 30 W 35 W 48 W Input Signal: 0.5 to 2.
REGULATORY NOTICES NOTE: This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
® World Headquarters 3500 Pelco Way Clovis, California 93612 USA USA & Canada Tel: 800/289-9100 Fax: 800/289-9150 International Tel: 1-559/292-1981 Fax: 1-559/348-1120 www.pelco.