User's Manual

ManualsBrandsPelco ManualsSecurity CameraPelco Pelco Security Camera C2446M-D

ADDENDUM

Addendum No.

C2498M-A

Date

November 17, 2005

Manuals Affected

Spectra III

™

Series Dome Drive Manuals:

C2487M-A

and

C2446M-D

Manual Update

The following are manual changes for Spectra III software Version 1.28 and greater and instructions for accessing a

Spectra III EVS dome system.

Presets

Spectra III system presets have been upgraded from 40 to 99. Each of the user-deﬁnable presets can be programmed to use pan, tilt, and camera settings.

The programmable presets are numbered 1-32 and 35-82.

The following presets are predeﬁned for speciﬁc functions:

Title Text

Title Text has been added to the Dome Settings menu. The title text is the

label used to identify the camera when it is viewed on the monitor. Up to

20 characters can be used for a title.

To edit the title text label, do the following:

1. Use the joystick to position the cursor beside EDIT TITLE TEXT.

2. Press Iris Open.

3. Use the joystick to position the cursor beside a character. Press Iris Open to select the character. To clear a

character, position the cursor beside BACKSPACE and then press Iris Open.

4. When the title is completed, move the cursor to OK. Press Iris Open to return to the Title Text menu.

5. Enable the title text label by doing the following:

a. Move the cursor beside ENABLE TITLE TEXT.

b. Press Iris Open. The cursor moves to the right.

c. Move the joystick up or down to view the selections. Select ON and then press Iris Open to enable the title text.

33 “Flip” command 95 Select main programming menu

34 “Pan zero” command 96 Stop a scan

88 IR ﬁlter IN (color) 97 Random scanning

89 IR ﬁlter OUT (black-white) 98 Frame scanning

90-91 Manual limit stops 99 Start auto scanning

92-93 Scan limit stops

(Continued on next page

)

BACK

EXIT

<ZONES>

<AUX>

<ALERT>*

<CLEAR>

DOME SETTINGS

ENABLE TITLE TEXT

BACK

EXIT

TITLE TEXT

LABEL FOR PRESET

PRESET NUMBER

------

1234567890 OK

ABCDEFGHIJ CANCEL

KLMNOPQRST

UVWXYZ.,-/ SPACE

abcdefghij BACKSPACE

klmnopqrst

uvwxyz*;:

Summary of content (50 pages)

PAGE 1
ADDENDUM Addendum No. C2498M-A Date November 17, 2005 Manuals Affected Spectra III™ Series Dome Drive Manuals: C2487M-A and C2446M-D Manual Update The following are manual changes for Spectra III software Version 1.28 and greater and instructions for accessing a Spectra III EVS dome system. Presets Spectra III system presets have been upgraded from 40 to 99. Each of the user-definable presets can be programmed to use pan, tilt, and camera settings. The programmable presets are numbered 1-32 and 35-82.
PAGE 2
Label Position The Title Text label can be positioned anywhere on the monitor. This feature allows you to customize the appearance of your monitor screen. To move the Title Text label, do the following: 1. Use the joystick to position the cursor beside a label. 2. Press Iris Open. 3. Use the joystick to move the label up, down, left, and/or right.
PAGE 3
OPERATION/PROGRAMMING ® Spectra III™ Series DD53CBW18 & DD53CBW18-X C2487M-A (4/05)
PAGE 4
OPERATION/PROGRAMMING MANUAL MODELS DD53CBW18 & DD53CBW18-X 18X DAY/NIGHT CAMERA
PAGE 5
CONTENTS WELCOME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 GETTING STARTED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 HOW TO OPERATE YOUR DOME SYSTEM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 6
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . POWER UP ACTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 7
WELCOME Thank you for purchasing Pelco’s premier integrated dome system, Spectra III. Your new system features a high resolution, day/night camera/optics package with IR filter and programmable dome drive software. This manual is designed to be a reference tool for the operation and programming of your system. Inside you will find information about Spectra III’s features and commands, as well as a detailed menu tree. Getting Started You will need to install your dome system before using this manual.
PAGE 8
HOW TO OPERATE YOUR DOME SYSTEM 6 Operation How to Control Pan and Tilt Move joystick or press the direction keys left/right and up/down. Zoom Far To zoom far, do the following: 1. Press the Zoom Tele button or turn the joystick clockwise until zoom stops at the 32X zoom limit. 2. Release the button or joystick for one second. 3. To continue zooming (digitally), press the button or turn the joystick clockwise again until you have the picture you want or reach the digital zoom1 limit.
PAGE 9
Accessing Main Menu (Preset 95) You can call up the main menu on your monitor by programming (setting or creating) preset 95 (preset 28 if in AD32-preset mode). Programming preset 95 for Pelco’s controllers varies according to the type of controller you are using. Instructions for programming preset 95 are given below for various Pelco controllers. CM6700/CM6800 1. 2. 3. Enter the number of the Spectra dome system and press the CAM key. Enter 95 and hold the PRESET key for two seconds.
PAGE 10
KBD4000/KBD4002 (GENEX® MULTIPLEXER) 1. 2. Press the SPOT MONITOR key. Enter 95, then hold the PRESET key (approximately five seconds) until the main menu appears on the screen. MPT9500 Standard Coaxitron Mode 1. Enter 95 and press the PRESET SET key. 2. Position the asterisk in the YES row and press the F1 key. The main menu appears. Extended Coaxitron or RS-485 Mode 1. Enter 95 and press the PRESET SET key. 2. Press the F2 key. The main menu appears. PelcoNet™ 1. 2. 8 Check the Set box.
PAGE 11
QUICK START GUIDE – SYSTEM SETUP SPECTRA III Presets LANGUAGE The following presets are reserved for special functions.
PAGE 12
10 C2487M-A (4/05)
PAGE 13
LANGUAGE SPECTRA III LANGUAGE ENGLISH ACK ALERT* RESET CAMERA CYCLE CAMERA POWER REBOOT SYSTEM EXIT The language for the on-screen menus is selectable. Available languages include English, Spanish, French, German, Italian, and Portuguese. The factory default language is English. To change the display language: 1. Use the joystick to position the cursor beside LANGUAGE. 2. Press Iris Open.
PAGE 14
SYSTEM INFORMATION SPECTRA III LANGUAGE ENGLISH ACK ALERT* The system Information screen displays dome drive model, software version, available memory, and other diagnostic information. System settings cannot be changed using this screen. This screen is for reference only. Use the following steps to display the System Information screen: 1. Use the joystick to position the cursor beside SYSTEM INFORMATION. 2. Press Iris Open.
PAGE 15
DISPLAY SETUP SPECTRA III LANGUAGE ENGLISH ACK ALERT* RESET CAMERA CYCLE CAMERA POWER REBOOT SYSTEM EXIT DISPLAY SETUP PRESET LABEL ZONE LABEL ZOOM AZIMUTH/ELEVATION DIRECTION ALARM MESSAGE 2 (SECS) 2 (SECS) 2 (SECS) 2 (SECS) OFF 2 (SECS) RESTORE FACTORY DEFAULTS BACK EXIT *This setting only applies to Pressurized Spectra III dome systems with software version 1.27 or higher.
PAGE 16
SPECTRA III LANGUAGE ENGLISH ACK ALERT* Labels can be placed anywhere on the monitor. This feature allows you to customize the appearance of your monitor screen. The following labels are not set at fixed positions: PRESET LABEL ZONE LABEL ALARM 1 ZOOM RATIO - XXX.
PAGE 17
DOME SETTINGS AUTO FOCUS SPECTRA III LANGUAGE ENGLISH ACK ALERT* Auto focus allows the lens to remain in focus during zoom-in, zoom-out, and motion functions. There are two auto focus settings: ON (default) If auto focus mode is set to ON, the camera will focus automatically when using pan, tilt, and zoom functions. OFF Focus is operated manually. To focus, press the Focus Far or Focus Near button on the controller.
PAGE 18
ZOOM LIMIT SPECTRA III LANGUAGE ENGLISH ACK ALERT* Zoom limit allows the user to define a limitation on the amount of telephoto zoom. The default setting is 144X. Cameras with 180X zoom (18X optical zoom and 10X electronic zoom) can be set for 18X, 32X, 72X, 144X, or 180X. RESET CAMERA CYCLE CAMERA POWER REBOOT SYSTEM ZOOM SPEED EXIT Zoom Speed allows the user to define how fast the dome will go from full wide zoom to the 18X optical zoom.
PAGE 19
IR CUT FILTER SPECTRA III LANGUAGE ENGLISH ACK ALERT* RESET CAMERA CYCLE CAMERA POWER REBOOT SYSTEM Spectra III has two modes of operation: color, and black and white. You can increase sensitivity in low light conditions by switching to black and white mode (removing the IR cut filter). Color mode is preferred in normal lighting conditions.
PAGE 20
SPECTRA III LANGUAGE SHUTTER SPEED ENGLISH ACK ALERT* Shutter speed is the duration of the electronic shutter. Program shutter speed to operate automatically (Auto) or manually (Numeric Value). AUTO (default) RESET CAMERA CYCLE CAMERA POWER REBOOT SYSTEM EXIT The electronic shutter speed is set automatically by the amount of light sensed by the camera.
PAGE 21
AUTO IRIS SPECTRA III LANGUAGE ENGLISH ACK ALERT* Auto iris is the lens function that automatically opens and closes the iris in response to changing light conditions. Program the auto iris to operate automatically or at a user-defined level. OFF Auto iris is disabled, and control is always manual. AUTO (default) The iris is adjusted automatically to produce a constant video output as determined by the Auto Iris Level setting.
PAGE 22
AUTO SHARPNESS SPECTRA III LANGUAGE ENGLISH ACK ALERT* Auto sharpness enhances picture detail by increasing the aperture gain of the camera and sharpening the edges in the picture. There are two settings: ON (default) The camera automatically maintains a normal sharpness mode. OFF The sharpness of the picture is set manually by programming the SHARPNESS LEVEL. Sharpness level settings range from 0-63.
PAGE 23
BACKLIGHT COMPENSATION (BLC) SPECTRA III LANGUAGE ENGLISH ACK ALERT* RESET CAMERA CYCLE CAMERA POWER REBOOT SYSTEM If a bright backlight is present, the subjects in the picture may appear dark or as a silhouette. Backlight compensation enhances objects in the center of the picture. The dome uses the center of the picture to adjust the iris. If there is a bright light source outside of this area, it will wash out to white.
PAGE 24
VIDEO LEVEL SPECTRA III LANGUAGE ENGLISH ACK ALERT* Set the video output to one of the following: NORMAL 1.0 volt peak-to-peak HIGH (default setting) 1.2 volt peak-to-peak to compensate for losses in video cable.
PAGE 25
AUTO FLIP SPECTRA III LANGUAGE ENGLISH ACK ALERT* RESET CAMERA CYCLE CAMERA POWER REBOOT SYSTEM When the camera tilts downward and goes just beyond the vertical position, the dome rotates 180 degrees. When the dome rotates (flips), the camera starts moving upward as long as you continue to hold the joystick in the down position. Once you let go of the joystick after the dome rotates, joystick control returns to normal operation.
PAGE 26
PARK TIME SPECTRA III LANGUAGE ENGLISH ACK ALERT* This feature allows the dome to begin a specified operation after a programmed time of inactivity. Park time can be programmed from 1 minute to 720 minutes (12 hours), or set to zero, which disables this feature. The default setting is zero. RESET CAMERA CYCLE CAMERA POWER REBOOT SYSTEM Park Action This feature will define the activity when the dome parks.
PAGE 27
SCAN SPEED SPECTRA III LANGUAGE ENGLISH ACK ALERT* RESET CAMERA CYCLE CAMERA POWER REBOOT SYSTEM Scan speed is the degrees per second that the dome will pan when in a scan mode. Scan speed is adjustable from 1 to 40 degrees per second through the programming menu. The default setting is 25 degrees per second. PRESET FREEZE FRAME This feature freezes the scene on the monitor when going to a preset.
PAGE 28
LIMIT STOPS SPECTRA III LANGUAGE ENGLISH ACK ALERT* Limit stops are programmable stops that limit the pan range of the dome. There must be two limits, a left and a right, to define an area. There are two types of limit stops: MANUAL A manual (joystick) pan operation stops when a limit stop is reached. SCAN The dome reverses direction during random, frame, or auto scanning when a limit stop is reached.
PAGE 29
AZIMUTH ZERO SPECTRA III LANGUAGE ENGLISH ACK ALERT* RESET CAMERA CYCLE CAMERA POWER REBOOT SYSTEM Azimuth is the pan angle from 0° to 359°. Azimuth zero is the pan position you specify to be the 0° point. Azimuth zero is normally set to magnetic north. Once set, azimuth and compass readings are based on the set Azimuth Zero point. To program azimuth zero: 1. Use the joystick to position the cursor beside SET AZIMUTH ZERO. 2. Press Iris Open. 3.
PAGE 30
POWER UP ACTION SPECTRA III LANGUAGE ENGLISH ACK ALERT* This setting defines a specific activity (scan, preset, pattern) to be performed in the event the power to the dome is cycled. The following settings are available: NONE No action. AUTO SCAN Dome starts auto scan operation. RANDOM SCAN Dome starts random scan operation. FRAME SCAN Dome starts frame scan operation. PRESET 1 Dome goes to preset 1. PRESET 8 Dome goes to preset 8.
PAGE 31
SPECTRA III LANGUAGE ENGLISH ACK ALERT* Line sync refers to a programmable function that allows you to synchronize all cameras within a matrix system. NOTE: Spectra III SE automatically senses V-sync input. No line sync setup is required for Pelco control systems that provide a V-sync signal.
PAGE 32
SPECTRA III LANGUAGE ENGLISH ACK ALERT* The Spectra III dome system has 40 programmable preset positions. Each preset can be programmed to use pan, tilt, all programmable camera settings, and motion detection. The presets are numbered 1-32 and 35-42. Presets 33 and 34 are fixed commands that cannot be programmed. Preset 33 is the “flip” command, which will pan the dome drive 180 degrees.
PAGE 33
3. SPECTRA III LANGUAGE ENGLISH ACK ALERT* RESET CAMERA CYCLE CAMERA POWER REBOOT SYSTEM Edit the preset scene: a. Use the joystick to position the cursor beside EDIT PRESET SCENE. b. Press Iris Open. c. Follow the directions displayed on the monitor. To clear a preset: 1. Use the joystick to position the cursor beside CLEAR PRESET. 2. Press Iris Open.
PAGE 34
SPECTRA III LANGUAGE ENGLISH ACK ALERT* A pattern is a memorized, repeating, series of pan, tilt, zoom and preset functions that can be recalled with a command from a controller or automatically by a programmed function. The Spectra III can handle one user-defined pattern. Pattern length is based upon memory usage rather than a fixed amount of time. RESET CAMERA CYCLE CAMERA POWER REBOOT SYSTEM To program a pattern: 1.
PAGE 35
SPECTRA III LANGUAGE ENGLISH ACK ALERT* A zone is a pan area, defined by a left and right limit, on the 360-degree pan plane. The Spectra dome system is capable of eight zones, each with a 20-character label. To program a zone: 1. Use the joystick to position the cursor beside ZONE NUMBER. Press Iris Open the cursor moves to the right. 2. Move the joystick up or down to view selections. Press Iris Open to enter selection. 3.
PAGE 36
SPECTRA III LANGUAGE ENGLISH ACK ALERT* Window blanking allows a user to program one, four-sided, user-defined area that cannot be viewed by the operator of the dome system. The blanked area will move with pan and tilt functions and automatically adjust in size as the lens zooms telephoto and wide. Spectra III has two style modes for window blanking, GRAY and SMEAR.
PAGE 37
6. The blanked area can be programmed to turn on or off at a specified zoom point. To set the zoom point: a. Use the joystick to position the cursor beside EDIT WINDOW ZOOM, and then press Iris Open. b. Zoom in to the point where you want window blanking to turn on. Press Iris Open to set the zoom point. NOTE: Since the area is already blanked out, it may be difficult to determine when you want window blanking to turn on. Reverse the window before setting the zoom point.
PAGE 38
REVERSE A blanked out area can be reversed to make it visible and the areas on both sides of it not visible. The areas above and below the blanking area remain visible. Reversing the window a second time will return it to its original condition. CLEAR WINDOW All areas that have been set for window blanking are cleared. BLANK ALL ABOVE/BLANK ALL BELOW Blank All Above and Blank All Below add additional flexibility to setting up privacy areas.
PAGE 39
SPECTRA III LANGUAGE ENGLISH Set the alarm contact: 1. Use the joystick to position the cursor beside ALARM CONTACT. ACK ALERT* RESET CAMERA CYCLE CAMERA POWER REBOOT SYSTEM 2. Press Iris Open. The cursor moves to the right. 3. Move the joystick up or down to view the following available selections. N/O (default) Normally open N/C Normally closed 4. Press Iris Open to enter selection.
PAGE 40
SPECTRA III LANGUAGE ENGLISH ACK ALERT* An auxiliary output is a programmable signal from the dome back box that can trigger another device to operate. An auxiliary output is programmable to trigger from an alarm or from a controller. An AUX 1 command from the controller will activate the relay in the dome and operate the device that is connected to the relay.
PAGE 41
SPECTRA III LANGUAGE ENGLISH ACK ALERT RESET CAMERA CYCLE CAMERA POWER REBOOT SYSTEM NOTE: The Alert section only applies to Pressurized Spectra III dome systems with software version 1.27 or higher. Spectra III systems that are not pressurized or pressurized systems that do not have dome drive software version 1.27 or higher will not display this menu item. Software version 1.
PAGE 42
ACK ACTION SPECTRA III LANGUAGE ENGLISH ACK ALERT Acknowledge action programs the alert label behavior after the alert condition has been acknowledged. The following settings are available for ACK ACTION: ALWAYS ON The alert label is displayed until alert conditions are cleared. RESET CAMERA CYCLE CAMERA POWER REBOOT SYSTEM OFF 8 HRS The alert label is turned off for 8 hours. Label returns after 8 hours if the alert condition persists.
PAGE 43
Use this setting to return the dome to factory default settings. SPECTRA III LANGUAGE ENGLISH ACK ALERT* RESET CAMERA CYCLE CAMERA POWER REBOOT SYSTEM EXIT DOME SETTINGS * BACK EXIT CLEAR RESTORE FACTORY DEFAULTS BACK EXIT *This setting only applies to Pressurized Spectra III dome systems with software version 1.
PAGE 44
SPECTRA III LANGUAGE ENGLISH ACK ALERT* Spectra III features password protection to prevent unauthorized changes to the dome settings. An operator can open the System Information and Display Setup Screens, but cannot access any of the Dome Settings menus. Controller/keyboard commands cannot override password-protected settings. If a keyboard is used to set a preset, pattern, or zone, the Enter Password screen appears on the monitor.
PAGE 45
RESET, CYCLE POWER, REBOOT RESET CAMERA SPECTRA III LANGUAGE ENGLISH ACK ALERT* RESET CAMERA CYCLE CAMERA POWER REBOOT SYSTEM EXIT *This setting only applies to Pressurized Spectra III dome systems with software version 1.27 or higher. Use this function to reset all camera settings to factory default parameters. CYCLE CAMERA POWER If the camera is not operating or if you lose camera control, cycle camera power.
PAGE 46
SOFTWARE/LANGUAGE FILE UPLOAD The RJ-45 data port of the dome drive allows access for on-site setup, testing, and uploading of revised operating software and language files. A Pelco field service tool is required to perform these operations. Field service tools include Pelco’s remote monitor kit (IPS-RMK), remote data port box (IPS-RDPE-2), and remote monitor cable (IPS-CABLE).
PAGE 47
SPECIFICATIONS DD53CBW18 Signal Format Scanning System Image Sensor Effective pixels Horizontal Resolution Lens Zoom Speed (optical range) Horizontal Angle of view Focus Maximum Sensitivity at 35 IRE Sync System White Balance Shutter Speed Iris Control Gain Control Video Output Video Signal to Noise NTSC 2:1 Interlace 1/4-inch CCD 724 (H) X 494 (V) >470 TV lines F1.6 (f=3.8~68.4 mm optical, 18X optical zoom, 10X electronic zoom) 2.9/4.2/5.8 seconds 51° at 3.8 mm wide zoom; 3° at 68.
PAGE 48
REGULATORY NOTICES This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RADIO AND TELEVISION INTERFERENCE This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to part 15 of the FCC rules.
PAGE 49
PAGE 50
Worldwide Headquarters 3500 Pelco Way Clovis, California 93612 USA USA & Canada Tel: 800/289-9100 Fax: 800/289-9150 International Tel: 1-559/292-1981 Fax: 1-559/348-1120 www.pelco.