User's Manual

9760-Graphic User Interface Manual
48
6. Click Next.
7. To program another step in the Macro repeat Step 3 to 6.
To erase a temporary Macro, follow the instructions for Clearing a Macro.
NOTE: Macros programmed in the graphic Controller program cannot be edited, they must be re-
moved and reprogrammed if a change is required. The maximum number of programmable in a
Macro is 48.
Figure 4-12: Macro Define Window.
4.10 MAP BUTTONS
Map buttons can switch cameras and load maps. Buttons are activated when the mouse arrow is positioned
on the button and the left mouse button is pressed. Buttons can be activated if they are displayed on a map
or if they are hidden.
There are three types of buttons:
⇒ Camera/Macro buttons (grey).
⇒ Alarm buttons (red).
⇒ Area buttons (yellow).
4.10.1 Show/hide Buttons
Select Show Buttons from Screen menu option to display/hide buttons. A tick will appear to the left of
Show Buttons when this feature is ON (i.e., buttons are displayed on the map). The tick will disappear when
the feature is OFF.
4.11 MUTE
Mute turns all alarm sounds ON/OFF.
To turn mute ON/OFF, select Mute from Screen menu option. A tick will appear to the left of Mute when
this feature is ON (i.e., no alarm sounds are produced). The tick will disappear when the feature is OFF.
2
1230
2
30
Each Macro step
is listed on a
new line