Spec Sheet

PRODUCT SPECIFICATION
viewing solutions
C2219 / REVISED 8-10-10
International Standards
Organization Registered Firm;
ISO 9001 Quality System
PMC Series Mounts
WALL/CEILING/RACK MOUNTS, MONITORS
Product Features
• Single Swing-Arm Wall Mount
• For Use with VESA
®
-Compliant Monitors and Selected
PMCL500 Series LCD Monitors
• Rack Mounts for All 200/300/400 Series LCD Monitors
• Fixed and Tilt Wall Mount for PMCL524F, PMCL532F, PMCL542F,
PMCL547F, and PMCL552F Monitors
• VESA-Compliant Wall and Ceiling Mounts
• Can Be Used with Pelco Series LCD Monitors
• Unique Tilt/Swivel Head Design Ensures Optimum Viewing Angle
• Easy to Install
• Aluminum or Steel Construction
• For Indoor Applications Only
Pelco’s family of monitor mounts has been designed for use with
VESA
®
-compliant monitors. Mounts for the PMCL 200/300/400/500
Series monitors include several wall and ceiling mounts. Three rack
mounts are available for 200/300/400 Series monitors. Many of the
mounts feature a unique tilt/swivel capability, which allows an LCD
monitor to be swiveled 360 degrees for portrait or landscape viewing
and tilted 35 degrees up or down. This tilt/swivel quality ensures the
proper viewing angle in any application. Made from heavy-duty
aluminum, these mounts are designed to support up to 90 pounds in
any indoor installation.
The PMCL-WM and PMCL-WMT are two-piece wall mounts. One
piece attaches to the rear of any monitor, and the other piece fastens
to a wall. The monitor then slides into the V-shaped piece on the
wall, making installation quick and easy. A setscrew secures the two
sections together. The PMCL-WMF is a flat wall mount used for Full
High Definition (FHD) monitors. The PMCL-WMT is equipped with
tilt/swivel capabilities, while the PMCL-WMTF is tilt only for FHD
monitors.
The PMCL-WM1A is a single-arm wall mount that is equipped with
convenient tilt/swivel swing arms, which provides greater viewing
flexibility.
The tilt/swivel PMCL-CMP allows an LCD monitor to be mounted
from the ceiling. It is equipped with an adjustable 15- to 30-inch
(38 to 76 cm) telescoping pole. The PMCL-CM is a similar ceiling
mount that does not include a pole. This mount allows a customer to
purchase any length of 1.5-inch NPT threaded pipe for use in
applications with higher ceilings. Both of these ceiling mounts can
also be used with Pelco’s MRCA ceiling mount.
The PMCL-VAF is an adapter plate that attaches to the PMCL-CM
ceiling mount and PMCL-CMP ceiling mount with pole. This adapter
plate allows the mounts to be used with larger format monitors, such
as Pelco's PMCL542F and PMCL547F monitors. It accommodates
monitors with 600 x 400 mm hole patterns.
The PMCL-V200 is an adapter plate that attaches to the
PMCL-WM, PMCL-WMT, PMCL-WM1A, PMCL-CM, and
PMCL-CMP. This adapter plate allows the mounts to be used with
the PMCL532F larger format monitor. It also accommodates
monitors with 200 x 200 mm hole patterns.
There are three rack mount kits for installing monitors in standard
19-inch (48 cm) equipment racks: the PMCL-17ARM, PMCL-19ARM,
and PMCL-19WRM, which accommodate the 17-inch (43 cm),
19-inch (48 cm), and the 19-inch (48 cm) wide monitors, respectively.
These mounts allow the monitor to tilt up or down for optimum
viewing.
PMCL-WM1A SINGLE-ARM WALL MOUNT
AND PMCL SERIES MONITOR