600 Series Video Surveillance Monitors 32’’ LED Monitor 43’’, 50’’, 55’’ & 55’’ 4K LED Monitor Models: PMCL632: PMCL643 PMCL650 PMCL655 PMCL655K
Contents for Wall Mount Monitor User Manual (10/16) ................................................................................................................. 1 Important Notices Statement ........................................................................................................................................................ 3 Regulatory Notices...............................................................................................................................................
Important Notices Statement For information about Pelco’s product-specific important notices and thereto related information, refer to www.pelco.com/legal. REGULATORY NOTICES This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Important Information SAFETY WARNING To use the product safely, correctly, and to keep users from suffering injury or property loss, please observe the following safety precautions when installing, using or maintaining. Please read this handbook before operating the product and keep the handbook for future reference. Notice and observe all the warnings and illustrations. Do not adjust, maintain or modify if you do not have appropriate qualifications.
Do not press, stretch or heat the connecting lines, which might cause damage to it. Please firmly grasp the plug of the connecting line when inserting and removing. Pulling the connecting line might cause damage to it. Cut off power and the connecting line immediately and contact the after-sales service center if the product or the connecting line is damaged for some reason. Continued use without maintenance might cause smoking or off-odor. Do not hang or lean on the product.
Product Appearance (Photos are for reference only) PERFORMANCE FEATURES Supports 3D comb-filter and 3D de-interlace. Low energy consumption, long service life. High contrast ratio and high luminance. Automatically eliminates ghosting. Rapid response times, no trailing image. Thin and light. Full-HD LCD panel with top-ranking video processing chip.
VGA INPUT: D-SUB 15 pins Connector HDMI INPUT: HDMI Connector BNC IN: BNC Connector BNC OUT: BNC Connector AUDIO IN: Phone Jack, Stereo USB IN:Support USB update DP INPUT: DisplayPort RS232 IN:EIA-RS-232 Attention Please turn off the power of the external device and the product when connecting. Main Menu MAIN MENU To activate, press the menu button on the bottom left of the bezel. The sub-menus of the main menu are: PC Menu, Picture menu, Audio menu, OSD menu, Function menu and Geometry menu.
(7Key) (43’’ 50’’ 55’’&55 4K LED Monitor) or A. “Source” button Press the button to display all the signal channel menus. B. “Upward” button Press the button to move the cursor to the needed function. Press the button to change the selected function in OSD menu item. C. “Downward” button Press the button to move the cursor to the needed function. Press the button to change the selected function in OSD menu item. D.
PICTURE MENU Picture menu can set picture mode, color temperature, aspect ratio, noise reduction, and color range. Press ▲▼ button to adjust value when item is selected, press menu button to exit. AUDIO MENU Audio menu can set sound mode, balance, auto volume, surround sound, and EQ. Press ▲▼ button to adjust value when item is selected, press menu button to exit. OPTION MENU OSD menu can set OSD language, restore to factory defaults, software update (via USB), blending, OSD duration, Auto Sleep, Misc.
FUNCTION MENU Screen menu can set auto adjust (automatically determine signal layout), horizontal position, vertical position, clock, and phase. Press ▲▼ button to adjust value when item is selected, press menu button to exit. Channel Selection “Source” menu can select channel (input). The options include VGA, HDMI and so on. Press ▲▼ button to adjust value when item is selected, press menu button to exit. How to Clean Product 1. Please wipe dust and other particles off with a clean soft towel. 2.
Troubleshooting Before consulting service staff, please use the following chart to attempt to diagnose the issue.
Fix 12 1 Switch to another channel or input. 2 Check whether the signal line is connected. 3 Check whether the signal line is connected. 4 Interference from by other electric appliance may be present. 5 Adjust fine tuning setting. 6 Adjust luminance setting. 7 Adjust contrast ratio setting. 8 Adjust color setting. 9 Check whether the system is set-up properly. 10 Check whether the power is on.
Pelco Troubleshooting Contact Information If the instructions provided fail to solve your problem, contact Pelco Product Support at 1-800-289-9100 (USA and Canada) or +1-559-292-1981 (international) for assistance. Be sure to have the serial number available when calling. Do not try to repair the unit yourself. Leave maintenance and repairs to qualified technical personnel only.