Spec Sheet

TECHNICAL SPECIFICATIONS
COMPONENT FEATURES
CAMERA
Imaging Device 1/2.8-inch
Imager Type CMOS
Imager Readout Progressive scan
Highest Resolution
3 MPx 2048 x 1536
2 MPx 1920 x 1080
1.3 MPx 1280 x 960
Signal-to-Noise Ratio >60 dB
Electronic Shutter Range
1/20000 sec (or faster) to 2 sec
Wide Dynamic Range 130 dB
White Balance Range 2,000° to 10,000°K
Sensitivity
3 ~ 9 mm f/1.3; 2,850°K; SNR >20 dB
Color (33 ms) 0.050 lux
Color (500 ms) 0.005 lux
Mono (33 ms) 0.010 lux
Mono (500 ms) 0.001 lux
Mono (IR on) 0.000 lux
Sensitivity
9 ~ 22mm f/1.6; 2,850°K; SNR >20 dB
Color (33 ms) 0.08 lux
Color (500 ms) 0.008 lux
Mono (33 ms) 0.04 lux
Mono (500 ms) 0.0025 lux
Mono (IR on) 0.000 lux
Day/Night Capabilities Yes
Mechanical IR Cut Filter Yes, (ON/OFF/AUTO selectable), with
different set points on lux
Adaptive IR Illumination 850nm wavelength, maximum distance of
30 meters (100 feet) IR illumination at 0 lux
SD Card Support Up to 128 GB
SDHC/SDXC Cards Supported Yes
LENS
Lens Type Built-in; varifocal
Focal Length f/1.3, 3 ~ 9 mm, f/1.6, 9 ~ 22 mm
Focus Autofocus, motorized
Zoom Remote
Auto Iris Type DC drive P-iris lens
Field of View in Degrees
VALUES IN PARENTHESES ARE INCHES; ALL OTHERS ARE CENTIMETERS.
Indoor/Vandal-Resistant, Surface Mount
• Attaches to 4S Electrical Box Adapter
• Meets IP66
• Meets IK10 (20J)
• Aluminum Base and Plastic Trim Ring
• RAL 9003
Environmental/Vandal-Resistant, Surface Mount
• Attaches to 4S Electrical Box with Adapter
• Meets IP66
• Meets Type 4X (with IMEEBAP adapter plate
accessory and IMEPM-E pendant mount accessory)
• Meets IK10 (20J)
• Aluminum Construction
• RAL 7047
• Heater
• Optional IR Illuminator
Ø 13.38 (5.27)
13.38 (5.27)
5.46
(2.15)
NPT 3/4”-14
NPT 3/4”-14
11.74
(4.62)
11.70 (4.60)
Ø 13.38 (5.27)
13.38 (5.27)
5.46
(2.15)
NPT 3/4”-14
NPT 3/4”-14
11.74
(4.62)
11.70 (4.60)
Lens
Focal
Length
3 MPx 1.3 & 2 MPx
Horiz Vert Horiz Vert
3 ~ 9 mm
Wide 100° 74° 93° 52°
Tele 39° 29° 37° 21°
9 ~ 22 mm
Wide 33° 24° 30° 14°
Tele 14° 10° 13° 7°