Spec sheet

TECHNICAL SPECIFICATIONS
ELECTRICAL
Ports RJ-45 connector for 100Base-TX
Auto MDI/MDI-X
Autonegotiate/manual setting
Cabling Type Cat5e or better for 100Base-TX
Input Voltage 18 to 32 VAC; 24 VAC nominal
22 to 27 VDC; 24 VDC nominal
Input Power
24 VAC 1 A (24 VA) maximum (without heater and
blower);
3 A (72 VA) maximum (with heater and
blower)
24 VDC 1 A (24 W) maximum (without heater and
blower);
3 A (72 W) maximum (with heater and blower)
PoE+ 18 W, Environmental models (with heater off,
blower on);*
15 W, Non-Environmental (with heater and
blower off)
HPoE 60 W, Environmental models (with heater and
blower on);
†
15 W, Non-environmental (with heater and
blower off)
*
Heater is disabled with PoE+ power selection.
†
Only 27 W of power is supplied to the heater.
CERTIFICATIONS/RATINGS/PATENTS
• CE, Class A
• FCC, Class A
• ICES-003, Class A
• UL/cUL Listed
•C-Tick
• NEMA TS-2 (Temp.) para 2.2.7.3 - 2.2.7.7
•KC
• ONVIF Profile S
• ONVIF Profile G
• ONVIF Profile Q
•Cisco
®
Medianet Media Services Proxy 2.0 compatible
• Environmental models, including stainless steel, were tested in
accordance with:
– IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-14, IEC 60068-2-30, and IEC
60068-2-78
• Environmental pendants, including stainless steel, were tested in
accordance with:
– IEC 60068-2-6 and IEC 60068-2-27
• Environmental models meet NEMA Type 4X and IP66 standards when
installed properly (B6-F-E, B6-PG-E, and B6-PSG-E)
• U.S. Patents 5,931,432; 6,793,415 B2; 6,802,656 B2; 6,821,222 B2;
7,161,615 B2
• IK10 impact-resistant bubble on all models were tested in accordance
with:
– IEC 62262