Installation Manual

12
4. Screw in the three captive fasteners until they are secure.
Figure 9: Installing the Dome Drive: Pendant Models
Installing the Lower Dome (In-Ceiling/Indoor)
1. Snap the clip on the end of the trim ring leash into the hole on the lip of the back box.
2. Snap the trim ring onto the plastic snap washers on the back box mounting screws.
Figure 10: Installing the Lower Dome: In-Ceiling Indoor Models
3. Apply power to the dome. The dome system will complete a configuration sequence
Installing the Lower Dome (In-Ceiling/Environmental)
1. Attach the back box leash to the lower dome.
2. Align the back box screws with the slots on the lower dome.
3. Push the lower dome onto the back box.