Installation Manual

14
Installing the Lower Dome (Stainless Steel/Environmental/Pendant)
1. Attach the back box leash to the lower dome using the nearest retainer screw.
Figure 13: Attaching the Leash to the Stainless Steel Lower Dome
2. Lightly apply O-ring lubricant (supplied with the lower dome) to the O-ring, and then install the O-ring in the groove on the trim ring
of the lower dome.
3. Remove the two lower dome mounting screws, and apply a drop of Loctite® 222MS (supplied with lower dome) to each screw.
1 Leash
2 Retainer Screw