Operation Manual

10
Selecting a Stream
From the live video page, you can select the video stream you want to view, and determine settings for the transmission of the video
streams. Your camera outputs four different video streams.
Primary Stream and Secondary Stream: Fully configurable video streams. You can configure both streams automatically using the
camera’s video presets, or you can customize them from the camera’s Video menu.
QuickView Stream: A predefined low resolution, low frame rate JPEG video stream that is available when configuring your camera’s
imaging settings, so you can see how your settings affect video in real time. The QuickView Stream is ideal for users with bandwidth or
processing limitations that could cause a high resolution, high frame rate video stream to pause or pixelate.
Event Stream: Displays a list of alerts triggered by an active analytic behavior. Each alert includes a screen capture, the profile that
was triggered, and the zone in which the event was detected.
1. Click the Select Stream icon .
2. Select the Primary, Secondary, QuickView, or Event stream.
NOTE: If the secondary stream has not been configured, the option will be unavailable.
Tilt Up: Click and hold to tilt the camera up.
Tilt Down: Click and hold to tilt the camera down.
Pan Left: Click and hold to pan the camera left.
Pan Right: Click and hold to pan the camera right.
Joystick: Click and hold to pan and tilt the camera. While the mouse cursor is over the joystick button, you can use
your mouse’s scroll wheel to zoom in and out.
Zoom In: Click and hold to zoom in.
Zoom Out: Click and hold to zoom out.
Focus Near: Click and hold to focus on an object near the camera.
Focus Far: Click and hold to focus on an object far away from the camera.
Iris Open: Click and hold to open the iris and brighten the image.
Iris Close: Click and hold to close the iris and darken the image.