Operation Manual

17
Configuring 802.1x Security
By default, 802.1x security is off. Cameras support EAP-MD5, EAP-TLS, EAP-TTLS, EAP-PEAP, and EAP-FAST protocols.
1. Select 802.1x from the Network menu.
2. Select On for 802.1x port security.
3. Select the (EAP) method from the Protocol drop-down menu.
4. Provide the authentication information for the EAP method you selected.
5. Click Save.
Configuring SNMP V2c
1. Select SNMP from the Network menu.
2. Select SNMP V2c.
3. Provide the community string for your SNMP manager. The default community string is “public.”
4. Provide the address and community string for your trap server under Trap Configuration.
5. Click Save.
Configuring SNMP V3
1. Select SNMP from the Network menu.
2. Select SNMP V3.
3. Enter the SNMP user name the camera will use to authenticate with the SNMP server.
4. Select the encryption algorithm for authentication from the Authentication drop-down menu. If using MD5 or SHA authentication
methods, enter your authentication code in the box provided.
5. Select the privacy protocol setting from the Privacy drop-down menu. If using DES or AES protocols, enter your privacy key in the
box provided.
6. Enter the host name or IP address of your trap server in the Address box under Trap Configuration.
7. Click Save.